NUGGET SERIES USER GUIDE For Nugget and Nugget +3
Important Safety Instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug the product from the wall outlet before cleaning. Do not use liquid cleaner or aerosol cleaners. Use a damp cloth for cleaning. 4.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna for the radio or television that is receiving the interference). – Reorient or relocate and increase the separation between the telecommunications equipment and receiving antenna.
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1.
exchange), and are not intended to be connected directly to a PSTN line (public switched telephone network). There are no user-serviceable parts inside the equipment. Statement of Limited Warranty Care and Maintenance Converting from Desk to Wall Mount • Keep the telephone dry. If it gets wet, wipe it dry immediately. Liquids might contain minerals that can corrode the electronic circuits. • Use and store the telephone in a normal temperature environment.
Table of Contents Nugget Phone Map. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Nugget +3 Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Nugget +3 Phone Map. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Unpacking Your Telephone. . . . . . . . . . . . . . . . . . . . . . . 10 Nugget Series . . . . . . . . . . . . . . . . . . . . . .
Nugget Phone Map Nugget +3 Phone Map NUGGET SERIES USER GUIDE www.teledex.
NUGGET SERIES Unpacking Your Telephone This package should contain the following: • Telephone base unit • Handset • Coiled handset cord • Straight line cord Optional items to be ordered separately: • Wall mount adaptor bracket • Short line cord for wall mounting Installation CAUTION INFORMATION • Never install telephone or network wiring during a lightning storm. • Never install telephone or Ethernet jacks in wet locations unless the jack is specifically designed for wet locations.
NUGGET SERIES RECEIVING A CALL PROGRAMMING PAUSE TIMING When the phone rings, lift the handset to begin the conversation. Pause timing options are 1 second through 5 seconds, programmable in 1 second increments. The default pause timing is 3.5 seconds. Programming PROGRAM SPEED DIALS USING SUBMERGED [STORE] AND [FLASH] [Store] and [Flash] programming keys are located under the faceplate and overlay. Access them by lifting up the faceplate and overlay, using either a paperclip or sharp pointer. 1.
NUGGET +3 SERIES Unpacking Your Telephone This package should contain the following: • • • • Telephone base unit Handset Coiled handset cord 1 straight line cord Optional items to be ordered separately: • Wall mount adaptor bracket • Short line cord for wall mounting Installation CAUTION INFORMATION • Never install telephone or network wiring during a lightning storm. • Never install telephone or Ethernet jacks in wet locations unless the jack is specifically designed for wet locations.
NUGGET +3 SERIES RECEIVING A CALL PROGRAMMING PAUSE TIMING When the phone rings lift the handset to begin the conversation. Pause timing options are 1 second through 5 seconds, programmable in 1 second increments. The default pause timing is 3.5 seconds. Programming PROGRAM SPEED DIALS USING SUBMERGED [STORE] AND [FLASH] Store and Flash programming keys are located under the faceplate and overlay. Lift up faceplate and overlay by using either a paperclip or sharp pointer.
Toll Free: +1.800.462.9446 Tel: +1.719.638.8821 Email: info@teledex.com www.teledex.com © 2013 Cetis, Inc. Product specifications and descriptions in this document subject to change without notice. CetisTM, Teledex®, TeleMatrix®, Scitec®, ExpressNet®, and Teledex iPhoneTM are trademarks or registered trademarks of Cetis, Inc.
