Owner manual

10 www.teledex.com NUGGET SERIES USER GUIDE
NUGGET +3 SERIES
Unpacking Your Telephone
This package should contain the following:
• Telephonebaseunit
• Handset
• Coiledhandsetcord
• 1straightlinecord
Optional items to be ordered separately:
• Wallmountadaptorbracket
• Shortlinecordforwallmounting
Installation
CAUTION INFORMATION
• Neverinstalltelephoneornetworkwiring
during a lightning storm.
• NeverinstalltelephoneorEthernetjacksin
wet locations unless the jack is specifically
designed for wet locations.
• Nevertouchuninstalledtelephonewiresor
terminals unless the telephone line has been
disconnected at the network interface.
• Usecautionwheninstallingormodifying
telephone and network lines.
CONNECTING THE HANDSET CORD
A 10 ft. modular handset coil cord is provided.
To install, simply plug one end of the coil cord
into the jack at the base of the handset, and the
other end into the jack located on the end of the
telephone base marked Handset.
CONNECTING THE LINE CORD
A 15 ft. modular line cord is provided. To install,
simply plug one end of the cord into the modular
jack at the top end of the base unit and the other
end into the wall jack.
Features
1. Speed-Dial Memory Keys: 3 user-
programmable speed-dial keys with 32 digit
capacity. [Flash] and [Pause] are storable.
Speed-dial memory is non-volatile RAM, so
programming is retained without the need
for batteries or telephone line power.
2. FLASH Key: Generates a 600 ms (0.6
seconds) hook switch “tap” signal.
Utilized to access special features on
PBX systems. The Flash function is
programmable at 100 ms to 1000Ms
(default is 600 ms). This button is located
underneath the faceplate.
3. REDIAL Key: Redials the last-dialed
telephone number, up to 32 digits.
4. STORE Key: Utilized to program the speed-
dial memory keys and the voice mail
retrieval touch bar. This button is located
underneath the faceplate.
5. Data Port: Provides a convenient extension
of the connected telephone line for
connecting a device such as a modem, fax,
or answering machine.
Operation
VOLUME
HANDSET AND SPEAKER VOLUME CONTROL
The handset volume control increases the volume
of the handset.
When the handset is off-hook, press the volume
control keys to increase or decrease the volume.
The handset volume control is an 8-step
operation. All models are hearing aid compatible.
RINGER VOLUME CONTROL
The ringer volume control switch is on the bottom
side of the phone.
The setting is either Low or HI (High).
CALLING
PLACING A CALL
• Liftthehandset.
• Dialoutbyusingthenumericdialpadorby
pressing a speed dial location.