Datasheet

25
HIGH VOLTAGE DIFFERENTIAL PROBES
Ordering Information
Specications
HVD3102 HVD3106 HVD3106-6M
Bandwidth 25 MHz 120 MHz 80 MHz
Rise Time (10-90) 14 ns 2.9 ns 4.4 ns
Differential Voltage Range High Attenuation
1500 V (DC + peak AC) from 7 to 400 V/div with up to 1500 V offset.
2000 V maximum typical measurable differential voltage before saturation
Low Attenuation
27.6 V (DC + peak AC) from 100 mV/div to 6.9 V/div with up to 150 V offset.
Common Mode Voltage Range ±1500 V (DC + peak AC), 1000 V
rms
(CAT III) (either input to ground)
Maximum Input Voltage to Earth 1000 V
rms
(CAT III) (either input to ground)
Max Safe Input 1000 V
rms
CAT III
Sensitivity 100 mV/div to 6.9V/div (100X)
7V/div to 400V/div (1000X)
100 mV/div to 6.9V/div (50X)
7V/div to 400V/div (500X)
100 mV/div to 6.9V/div (50X)
7V/div to 400V/div (500X)
Gain Accuracy 1% (LF, guaranteed)
Slew Rate 100 V/ns (maximum) 400 V/ns (maximum) 400 V/ns (maximum)
Attenuation 100x / 1000x 50x / 500x 50x / 500x
Input Impedance 10 MΩ || 2.5 pF (between inputs), 5 MΩ || 5.0 pF (either input to ground)
Input Coupling DC only
Output Coupling AC, DC, GND
Output Termination 1 MΩ
Interface ProBus
Input Lead Length 40 cm input lead length
Cable Length (input lead to
oscilloscope connection)
2.25 m 6.80 m
Noise and Rejection
CMRR (Typical) DC - 60 Hz: 80 dB
1 MHz: 65 dB
5 MHz: 40 dB
20 MHz: 30 dB
DC - 60 Hz: 80 dB
1 MHz: 65 dB
5 MHz: 40 dB
20 MHz: 30 dB
100 MHz: 30 dB
DC - 60 Hz: 80 dB
1 MHz: 65 dB
5 MHz: 40 dB
20 MHz: 30 dB
80 MHz: 30 dB
Noise (Probe) 100X: <15 mV
rms
1000X: <85 mV
rms
(referred to input)
50X: <30 mV
rms
500X: <150 mV
rms
(referred to input)
50X: <30 mV
rms
500X: <150 mV
rms
(referred to input)
Environmental
Temperature (Operating) 0°C to 50°C
Temperature (Non-Operating) -40°C to 70°C
Humidity (Operating) 5% to 80% RH (Non-Condensing) up to 30°C, decreasing linearly to 50% RH at 50°C
Humidity (Non-Operating) 5% to 95% RH (Non-Condensing), 75% RH above 30°C, 45% RH above 40°C
Altitude (Operating) 2,000 m maximum (3,000 m maximum at 25°C)
Altitude (Non-Operating) 10,000 m
Pollution Degree 2, Indoor use only
Product Description Product Code
25 MHz, High Voltage Differential Probe HVD3102
120 MHz, High Voltage Differential Probe HVD3106
80 MHz, High Voltage Differential Probe with 6m cable HVD3106-6M
High Voltage Replacement Accessories Kit (Includes 2 each, 1 Black, 1 Red):
Safety Alligator Clips, Plunger Pincer Clips, Plunger Hook Clips, Plunger Alligator Clips, Spade Terminals
PK-HV-001
Safety Alligator Clips (Quantity 2 - 1 Black, 1 Red) PK-HVA-01
Plunger Pincer Clips (Quantity 2 - 1 Black, 1 Red) PK-HVA-02
Plunger Hook Clips (Quantity 2 - 1 Black, 1 Red) PK-HVA-03
Plunger Alligator Clips (Quantity 2 - 1 Black, 1 Red) PK-HVA-04
Spade Terminals (Quantity 2 - 1 Black, 1 Red) PK-HVA-05