Current Probes Accurately Measure AC, DC and Impulse Currents
Measure Currents in a Wide Range of Applications Measuring AC and DC Currents LeCroy current probes do not require the breaking of a circuit or the insertion of a shunt to make accurate and reliable current measurements. Based on a combination of Hall effect and transformer technology, LeCroy current probes are ideal for making accurate AC, DC, and impulse current measurements.
CP031 – 30A, 100 MHz Current Probe Features • 100 MHz bandwidth • Small form factor accommodates large conductors with small jaw size • 30 Arms continuous current, 50 A peak current The CP031 is LeCroy’s highest bandwidth current probe. Along with the high 100 MHz bandwidth the CP031can probe continuous currents of 30 A rms and peak currents up to 50 A. The CP031 features a small form factor making it easier to probe on a crowded, compact board.
CP030 – 30 A, 50 MHz Current Probe Features • Small form factor accommodates large conductors with small jaw size • 30 Arms continuous current, 50 MHz bandwidth • 50 A peak current The CP030 was designed with a small form factor for today’s crowded boards. The small jaw can probe currents in tight spaces and still clamp onto conductors up to 5 mm in diameter. Continuous currents of 30 Arms and peak currents of 50 A can be measured by the CP030, which also features a 50 MHz bandwidth.
AP015 – 30 A, 50 MHz Current Probe Features • 30 A rms continuous current, 50 MHz bandwidth • 50 A peak current for up to 10 seconds • Overheating and Probe Unlock Detection The AP015 current probe can measure continuous current of 30 A rms and peak pulses of up to 50 A for durations up to 10 seconds. This probe also features an overheating protection circuit, which will display an on-screen warning to the user to prevent damage.
CP150 – 150 A, 10 MHz Current Probe CP500 – 500 A, 2 MHz Current Probe CP150 Features 160 140 • 150 Arms continuous 120 current 100 • 500 A peak Current (A rms) 80 60 • 10 MHz bandwidth 40 20 0 Frequency (Hz) General Characteristics Electrical Characteristics Max. Continuous Input Current Bandwidth Max. Peak Current at Pulse Width Rise time (typical) Minimum Sensitivity Max.
Related Products and Ordering Information Related Products DA1855A – Differential Amplifier The DA1855A high-performance differential amplifier provides 100 MHz bandwidth, industry leading overdrive recovery, and outstanding common mode rejection ratio. The fast overdrive recovery provides the ability to make critical saturation voltage measurements while the high CMRR enables upper gate drive measurements.
