Data Sheet

99
5.1.81 PD_AddModeVDO
Adds Mode with VDO in PD Exerciser. It must be called before PD_DiscoverModes or
PD_WaitForDiscoverModes or PD_PerformDiscoveryProcess or PD_DelayAutoResponse commands to
take effect.
Format
Call PD_AddModeVDO(PD_Generic_VDO $ModeVdo)
Parameters
$ModeVdo
Parameter type is PD_Generic_VDO. Refer to PD_VDM_Discover_Modes_Response for available VDOs
which can be use as this parameter.
Result
None
Examples
local $vdo_1 = PD_VDO
{
Data = 0x01
}
call PD_AddModeVDO($vdo_1)
5.1.82 PD_ResetModes
Clears Modes which are added to PD Exerciser. Could be called before adding one or more
Mode.
Format
Call PD_ResetModes()
Parameters
None
Result
None
Examples
call PD_ResetModes()
5.1.83 PD_DiscoverModes
Starts DicoverModes AMS.
Format
Call PD_DiscoverModes(OrderedSetType, selectedSvid)
Parameters
OrderedSetType
possible values:
PD_ORDERED_SET_TYPE_SOP