User manual

Frontline Technical Support: Phone [phone] or email [e-mail]
Quick Start
Guide
Computer System Requirements
Supported Systems
l Operating System: Windows 7/8/10
l USB:USB 2.0 and later
Minimum Requirements
l Processor: Core i5 at 2.7 GHz
l RAM: 4 GB
l Free Hard Disk Space on C: drive: 20 GB
Install Software
l From Download: Download the latest ComProbe installer
from FTE.com. Once downloaded, double-click the
installer and follow the directions.
http://www.fte.com/bpale-soft
1. Connecting/Powering
Insert the USB cable mini-connector into the USB port on the Frontline BPA low energy
hardware.
Insert the other end of the USB cable into the PC.
2. Select Data Capture Method
Now that the Frontline BPA low energy hardware is powered up , the next step is to
open Frontline BPA low energy software and select the data capture method.
Open "Frontline [version #]" from the Start menu or from the Desktop folder.
Select "Frontline ComProbe Protocol Analysis System".
The Select Data Capture Method dialog appears.
Select Bluetooth low energy and click Run.
The ComProbe BPAlow energy analyzer's Control window will open. From the
Options menu select I/O Settings or click on the toolbar.