Data Sheet

USBProtocolSuiteUserManual 489
UsingtheNavigator TeledyneLeCroyCorporation
Tosetthehighestpacketviewable,dragthebottomdelimiterdown.Stopwhenthetool
tipindicatesyouareatthedesiredhighestpacket.
Figure 10.33: Navigator Delimiter
To Determine Current Position
Inadditiontothetwoyellowrangedelimiters,thesliderhasagoldencurrent‐position
indicator(seeabove).Thecurrent‐positionindicatorshowswhereyouareinthetrace
displaywithrespecttothepossibleviewingrange.
Forexample,supposeyousetviewingrangetopacket0throughpacket500(thetop
rangedelimiterisatpacket0,andthebottomrangedelimiterisatpacket500).Ifyou
thenmovethecurrent‐positionindicatorontheslidertomidwaybetweenthetopand
bottomdelimiters,thenpacket250appearsinthemiddleofthetracedisplay.
To Reset Navigator Range
YoucanresettheNavigatorrangeusingthetoolbarNavigatorRangebutton.Pressthe
buttontobringuptheNavigatorRangedrop‐downmenu.
Themenuhasthefollowingoptions:
 SetRangetoWholeTrace:Allowsyoutoresettherangetoincludetheentire
tracefilecontents.Thetoprangedelimiterisplacedatthelowestpacketnum‐
berinthetrace.Thebottomrangedelimiterisplacedatthehighestpacketnum‐
berinthetrace.
BottomDelimiter
TopDelimiter
CurrentPositionIndicator