User manual

Figure 7.7 - Timestamping Options dialog
Enabling/Disabling Timestamp
To enable timestamping click to make a check appear in the check box Store Timestamps (This time takes
effect immediately). Removing the check will disable timestamping.
Changing the Timestamp Resolution
This option affects the resolution of the timestamp stored in the capture file. The default timestamp is 10
milliseconds. This value is determined by the operating system and is the smallest "normal" resolutions possible.
Note: The raw timestamp value is the number of 100-nanosecond intervals since the
beginning of January 1, 1601. This is standard Windows time.
It is also possible to use "high resolution"
timestamping. High resolution timestamp
values are marked by an asterisk as high
resolution in the drop down list. To change
timestamping resolutions:
1. Go to the Capture Options section
of the window.
2. Change the resolution listed in the
Chapter 7 General Information TELEDYNE LECROY
Frontline BPA low energy Hardware & Software User Manual 198