User manual

Figure 4.11 - Sample Exported Frames Text File
4.3.1.11 Panes in the Frame Display
4.3.1.11.1 Summary Pane
The Summary pane displays a one-line summary of every frame in a capture buffer or file, including frame
number, timestamp, length and basic protocol information. The protocol information included for each frame
depends on the protocol selected in the summary layer box (located directly below the main toolbar).
On a two-channel circuit, the background color of the one-line summary indicates whether the frame came from
the DTE or the DCE device. Frames with a white background come from the DTE device, frames with a gray
background come from the DCE device.
Frame numbers in red indicate errors, either physical (byte-level) or frame errors. If the error is a frame error in
the displayed protocol layer, the bytes where the error occurred is displayed in red. The Decode Pane gives
precise information as to the type of error and where it occurred.
The Summary pane is synchronized with the other panes in this window. Click on a frame in the Summary
pane, and the bytes for that frame is highlighted in the Event pane while the Decode pane displays the full
decode for that frame. Any other panes which are being viewed are updated accordingly. If you use one pane to
select a subset of the frame, then only that subset of the frame is highlighted in the other panes.
Protocol Tabs
Protocol filter tabs are displayed in the Frame Display above the Summary pane.
l These tabs are arranged in separate color-coded groups. These groups and their colors are General (white),
Classic Bluetooth (blue), Bluetooth low energy (green), 802.11 (orange), USB (purple), and SD (brown). The
General group applies to all technologies. The other groups are technology-specific.
Figure 4.12 - Example Protocol Tags
TELEDYNE LECROY Chapter 4 Capturing and Analyzing Data
54 Frontline BPA low energy Hardware & Software User Manual