User manual

921445-00 Rev A

USER INTERFACE

Channel Descriptor Box

A menu bar of drop-down menus lets you access set up dialogs and

other functions. All functionality can be accessed through either the

menu bar or other shortcuts.

If an action can be “undone” (such as recalling a setup), a small

Undo button appears at the far right of the menu bar. Click this

to return to the previous oscilloscope display.

The grid area displays the waveform traces. You can adjust the

brightness of the grid lines to make other objects more visible.

Trigger level (vertical axis) and trigger position (horizontal axis)

indicators appear on the grid when a trigger is set, color-coded to match

the input.

Cursors show where measurement points have been set. Touch-and-

drag cursor indicators to quickly reposition the measurement point.

Timebase Descriptor Box

Timebase and Trigger descriptor boxes appear at the right of the

display. Timebase and Trigger settings only apply to channel traces.

Touch the descriptor box to open the corresponding set up dialog.

Channel (C1-C4), Zoom (Z1-Z4), Math (F1-F2), or Memory (M1-M4)

descriptor boxes appear immediately below the grid and summarize

current settings for each open trace. Touch the descriptor box to open

the corresponding set up dialog.

# Samples

Trigger Delay (Position)

Time/div

Sample Rate

Sampling Mode

(blank when in real-time mode)

Channel Abbreviation

Gain Setting

Offset Setting

Pre-Processing Summary Listing

(summarizes changes from

default states)

Coupling

Averaging Sweeps Count

Dialogs appear at the bottom of the display for entering set up data.

The top dialog will be the main entry point for the selected function.

For convenience, related dialogs appear as a series of tabs behind the

main dialog. Touch the tab to open the dialog.