User manual

921445-00 Rev A
INTRODUCTION
2
About the HDO4000 Oscillosocopes
Combining Teledyne LeCroy’s HD4096 high-definition technology with
long memory, a compact form factor, 12.1" touch screen display and
powerful debug tools, the HDO4000 Oscillosocopes are ideal for precise
measurements and quick debug. Tools such as WaveScan
®
Search and
Find, LabNotebook Report Generator and History Mode help identify,
isolate, and document problems for faster troubleshooting.
HD4096
HD4096 high-definition technology consists of high sample rate 12-bit
ADCs, high signal-to-noise input amplifiers, and a low-noise system
architecture. This technology enables HDO™ oscilloscopes to capture
and display signals up to 1 GHz with a high sample rate and 16 times
more resolution than other oscilloscopes.
Waveforms captured and displayed on the HDO4000 with HD4096
technology are cleaner and crisper. Signal details often lost in the noise
are clearly visible and easy to distinguish, and measurements can be
performed with unmatched precision for improved debug and analysis.
Specifications
Detailed specifications are maintained in the Datasheet on the product
page at teledynelecroy.com.
WaveScan Search and Find
WaveScan
®
Search and Find allows you to search a single acquisition
using more than 20 different criteria. Or, set up a scan condition and
scan for an event over hours or even days.
History Mode
Never miss a waveform. History mode lets you scroll back in time
to view previous waveforms and isolate anomalies. Use cursors and
measurement parameters to quickly find the source of problems. History
mode is always available with a single button press, no need to enable
this mode.
LabNotebook Report Generator
Save and document all your waveforms, settings and screen images
through the LabNotebook report generation tool. With LabNotebook,
there’s no need to navigate multiple menus to save all these files
independently. Returning your oscilloscope to a past state is only one
button press away thanks to LabNotebook’s flashback feature.
Materials List
Check that you have all the parts listed here. Contact Teledyne LeCroy
immediately if any part is missing.
• One (1) oscilloscope
• Two (2) or four (4) passive probes (one for each channel)
• One (1) AC line (power) cord
• One (1) protective front cover
• One (1) Getting Started Guide
• One (1) Oscilloscope Security Certificate
• One (1) Oscilloscope Registration Card
• One (1) Calibration Document
Key Specifications
Bandwidth 200 MHz – 1 GHz
Channels 2 or 4
Sample Rate (all channels) 2.5 GS/s
Memory (per channel) 12.5 Mpts/ch
Maximum Memory 50 Mpts