User Manual

13
SPECIFICATIONS
HDO4022
HDO4022-MS
HDO4024
HDO4024-MS
HDO4032
HDO4032-MS
HDO4034
HDO4034-MS
HDO4054
HDO4054-MS
HDO4104
HDO4104-MS
Analog - Vertical
Bandwidth (@ 50Ω) 200 MHz 350 MHz 500 MHz 1 GHz
Rise time 1.75 ns typical 1 ns typical 700 ps typical 450 ps typical
Input Channels 2 4 2 4 4 4
Vertical Resolution 12-bits; up to 15-bits with enhanced resolution (ERES)
Sensitivity 50 Ω: 1mV/div - 1 V/div; 1 MΩ: 1 mV/div - 10 V/div
DC Gain Accuracy ±(0.5%) Full Scale, offset at 0 V
BW Limit 20 MHz, 200 MHz
Maximum Input Voltage 50 Ω: 5 Vrms; 1 MΩ: 400 V max (DC + Peak AC 10 kHz)
Input Coupling 50 Ω: DC, GND; 1 MΩ: AC, DC, GND
Input Impedance 50 Ω ±2.0%, 1 MΩ ±2.0% || 15 pF
Offset Range 50 Ω: 1 mV - 4.95 mV: ±1.6 V, 5 mV - 9.9 mV: ±4 V, 10 mV - 19.8 mV: ±8 V, 20 mV - 1 V: ±10 V
1 MΩ: 1 mV - 4.95 mV: ±1.6 V, 5 mV - 9.9 mV: ±4 V, 10 mV - 19.8 mV: ±8 V, 20 mV - 100 mV: ±16 V,
  102 mV - 198 mV: ±80V, 200 mV - 1 V: ±160 V, 1.02 V -10 V: ±400 V
Offset Accuracy ±(1.0% of offset value + 0.5%FS + 0.02% of max offset + 1 mV)
Analog - Acquisition
Sample Rate (Single-shot) 2.5 GS/s
Sample Rate (Repetitive) 125 GS/s
Record Length Standard -STD: 12.5 Mpts/ch (all channels) 25 Mpts (interleaved)
Optional -L:  25 Mpts/ch (all channels), 50 Mpts (interleaved)
Acquisition Modes Real Time, Roll, RIS (Random Interleaved Sampling),
Sequence (Segmented Memory up to 10,000 segments with 1μs intersegment time)
Timebase Range 200 ps/div - 1.25 ks/div with standard memory (up to 2.5 ks/div with -L memory);
RIS available at 10 ns/div; Roll Mode available at 100 ms/div and 5 MS/s
Timebase Accuracy ±2.5 ppm for 5 to 40C + 1.0 ppm/year from calibration
Digital - Vertical and Acquisition (-MS Models Only)
Input Channels 16 Digital Channels
Threshold Groupings Pod 2: D15 - D8, Pod 1: D7 - D0
Threshold Selections TTL, ECL, CMOS (2.5 V, 3.3 V, 5 V), PECL, LVDS or User Dened
Maximum Input Voltage ±30V Peak
Threshold Accuracy ±(3% of threshold setting + 100mV)
Input Dynamic Range ±20V
Minimum Input Voltage Swing 400mV
Input Impedance (Flying Leads) 100 kΩ || 5 pF
Maximum Input Frequency 250 MHz
Sample Rate 1.25 GS/s
Record Length Standard STD: 25MS - 16 Channels
Optional -L: 50MS - 16 Channels
Minimum Detectable Pulse Width 2 ns
Channel-to-Channel Skew 350ps
User dened threshold range ±10V in 20mV steps
User dened hysteresis range 100 mV to 1.4 V in 100 mV steps
Trigger System
Modes Auto, Normal, Single, Stop
Sources Any input channel, External, Ext/10, or line; slope and level unique to each source (except for line trigger)
Coupling DC, AC, HFREJ, LFREJ
Pre-trigger Delay 0-100% of full scale
Post-trigger Delay 0-10,000 Divisions
Hold-off 2ns up to 20s or 1 to 1,000,000,000 events
Internal Trigger Level Range ±4.1 Divisions
External Trigger Level Range Ext: ±400mV, Ext/10: ±4V
Trigger Types Edge, Glitch, Width, Logic (Pattern), TV (NTSC, PAL, SECAM, HDTV–720p, 1080i, 1080p), Runt, Slew Rate,
Interval (signal or Pattern), Dropout, Qualied (State or Edge)