Operators Manual Owner manual

Operator's Manual
SAVE SETUP TO FILE
1. Touch Save Panel to File and enter the full path to the file, or touch Browse to navigate to the file
folder.
2. Enter a filename, or choose a existing file to overwrite.
3. Touch Save Now!
Recalling Oscilloscope Setups
Access the Recall Setup... dialog by either selecting File → Recall Setup... from the menu bar or clicking
the Recall Instrument Setup button on the main Save/Recall dialog.
RECALL SETUP FROM MEMORY
Touch one of the six Recall buttons under Recall From Internal Setup....
NOTE:If a setup has been stored to a location, it is labeled with the name and save date/time. Otherwise,
the slot is labeled Empty.
RECALL SETUP FROM FILE
1. Touch Recall panel from file and provide the path to the destination file, or touch Browse to navigate
to the file.
2. Touch Recall Now!
Save/Recall Waveforms
Save Waveform
The Save Waveform dialog is used to save traces to either an internal memory location, or to a text or
binary format file. The source waveform can be any trace; for example, a channel, math function, or a
waveform stored in memory.
Access the Save Waveform dialog by either selectingFile → Save Waveform from the menu bar or
clicking the Save Waveform button on the main Save/Recall dialog.
NOTE: This dialog is for saving waveforms. Save S-parameter files, using the Result Actions Dialog.
922499 Rev B
111