Operators Manual Owner manual

HDO6000 High Definition Oscilloscope
Maintenance
Cleaning
Clean only the exterior of the oscilloscope and probes using a soft cloth moistened with water. If required,
use an aqueous solution of 75% isopropyl alcohol for more efficient cleaning. Exercise care to avoid
scratching the display. Unplug the power cord from the AC outlet before cleaning.
CAUTION. Do not attempt to clean internal parts. Avoid getting moisture inside the unit during
external cleaning. Do not use any abrasive or chemical cleaning agents.
Calibration
The oscilloscope is calibrated at the factory prior to being shipped. This calibration is run at 23° C (± 2° C)
and is valid for temperatures ± 5° C of the original calibration temperature. Within this temperature range
the oscilloscope will meet all of the specifications.
See Calibration Settings for an explanation of the manual calibration options.
Schedule an annual factory calibration as part of your regular maintenance. Contact us about extended
warranty, calibration, and upgrade plans available for purchase.
Touch Screen Calibration
Periodically calibrate the touch screen to maintain its accuracy and responsiveness. We recommend that
you use the stylus or a capped pen rather than your finger for this procedure.
1. From the menu bar, choose Utilities > Utilities Setup.
2. On the Utilities main dialog, touch Touchscreen Calibration.
3. Following the prompts, touch as close as possible to the center of each red cross that appears on the
screen until the calibration sequence is complete.
Language Selection
To change the language that appears on the display, go to Utilities > Preference Setup > Preferences and
make your Language selection. Reboot the oscilloscope after changing the language.
To also change the language of the Windows operating system:
1. Choose File > Minimize to hide the oscilloscope display and show the Windows Desktop.
2. From the Windows task bar, choose Start > Control Panel > Clock, Language and Region.
3. Under Region and Language select Change Display Language.
4. Touch the Install/Uninstall Languages button.
5. Select Install Language and Browse Computer or Network.
6. Touch the Browse button, navigate to D:\Lang Packs\ and select the language you want to install. The
available languages are: German, Spanish, French, Italian, and Japanese. Follow the installer prompts.
NOTE: Other language packs are available from Microsoft’s website.
7. Touch the oscilloscope icon in the lower-right corner of the desktop to restore the display.
122
922499 Rev B