Operators Manual Owner manual

Operator's Manual
HDO System Recovery
Using Acronis True Image Home
Your HDO oscilloscope is designed to operate reliably for many years. The application software operating
the instrument runs on a Microsoft Windows
®
7 Professional for Embedded Systems platform. The
loading or incomplete removal of additional Windows applications can cause problems in the stability of
the operating system. Severe cases may require you to reload the base operating system and
oscilloscope application.
For this purpose, Teledyne LeCroy provides the Acronis True Image Home
®
recovery application and a
backup image in an extra partition on the instrument's hard drive. The recovery process is easy to
perform.
The following procedures cover the basic steps for restoring the oscilloscope using Acronis True Image
Home ver. 2011. Follow each procedure completely in the order shown. Since third-party recovery
software is used, our instructions may not be the most definitive or current. We encourage you to take
advantage of additional resources available from the Acronis website:
Acronis True Image Home
www.acronis.com/homecomputing/download/docs/
Before You Start
l Connect a keyboard and mouse via the USB host ports.
Run the Recovery Wizard
1. Apply power to the oscilloscope.
2. During the startup process, as soon as you see the message "Starting Acronis Loader... Press F11 for
Acronis Startup Recovery Manager," press the F11 key until the Acronis logo appears momentarily.
The Acronis True Image Home window is displayed.
NOTE: Do not press F11 before you see the "Starting Acronis Loader..." message or you will enter the
boot device selection menu. If a bootmenu dialog box appears, press Cancel or Esc.
3. Select Acronis True Image Home (Full Version).
4. On the Acronis True Image Home page, under options for Recover, select My Disks. The Recovery Wiz-
ard opens.
5. On the Recovery Wizard, under Archive Selection, select the disk archive that has a create date, then
click Next.
6. Under Recovery Method, select Recover whole disks and partitions, then click Next.
7. Under What to Recover, select NTFS (SYSTEM) (C:), then click Next.
8. Under Settings of Partition C, in the top section, Partition location (required), select New Location.The
Partition Destination window opens.
9. Under New Partition Location, select NTFS (SYSTEM) (D:), then click Accept. This returns you to the
Settings of Partition C step. Click Next.
10. A summary window is displayed indicating that Acronis True Image is ready to proceed with Recov-
ering partition C -> D. Click Proceed to start the recovery process.
922499 Rev B
125