Operators Manual Owner manual

HDO6000 High Definition Oscilloscope

Inputs/Outputs

Front Input/Output Panel

A. The Power button turns on/off the oscilloscope.

B. BNC connectors for analog input on Channels 1–4 (or 1–2 depending on model), and EXT for con-

necting an external trigger device.

C. Mixed signal interface for digital inputs.

D. Ground and calibration output terminals are used to compensate passive probes.

E. Two (2) front-mounted host USB ports can be used for transferring data or connecting peripherals

such as a mouse or keyboard.

Side Input/Output Panel

A. Video Output VGA, DVI, and HDMI ports connect the oscilloscope to external

monitors.

B. USB Ports (4) allow you to connect external USB devices, such as storage

drives.

C. Ethernet Ports (2) connect the oscilloscope to networks.

D. Audio Input/Output Mic, Speaker, and Line-In jacks connect the oscilloscope to

external audio devices.

922499 Rev B