Operators Manual Owner manual

HDO6000 High Definition Oscilloscope

Digital Inputs

Standard with all HDO6000-MS model oscilloscopes, the

digital leadset enables input of up-to-16 lines of digital

data. Lines can be organized into four logical groups and

can be named appropriately.

The digital leadset features two digital banks with separate

threshold and hysteresis controls, making it possible to

simultaneously view data from different logic families.

Connecting/Disconnecting the Leadset

To connect the leadset to the oscilloscope, push the connector into the mixed signal interface below the

front panel until you hear a click.

To remove the leadset, press in and hold the buttons on each side of the connector, then pull out to

release it.

Grounding Leads

Each flying lead has a signal and a ground connection. A variety of ground extenders and flying ground

leads are available for different probing needs.

In order to achieve optimal signal integrity, you should connect the ground at the tip of the flying lead for

each input used in your measurements. Use either the provided ground extenders or ground flying leads to

make the ground connection.

922499 Rev B