Operators Manual Owner manual

HDO6000 High Definition Oscilloscope

Preprocessing Symbols on Descriptor Boxes

Pre-Processing Type Long Form Short Form

Sin X Interpolation SINX S

Averaging AVG A

Inversion INV I

Deskew DSQ DQ

Coupling DC50, DC1M or AC1M D50, D1M, or A1

Ground GND G

Bandwidth Limiting BWL B

Similar descriptor boxes appear for zoom (Zx), math (Fx), and memory (Mx) traces. These descriptor

boxes show any Horizontal scaling that differs from the signal Timebase.

Digital Descriptor Box

Digital descriptor boxes appear whenever a digital line group is enabled on a mixed-

signal model oscilloscope. Like Channel descriptors, they are numbered 1-4

corresponding to one of the four line groups.They show the number of digital lines in

the group, the digital sample rate, and the digital memory.

Timebase Descriptor Box

The TimeBase descriptor box shows: (clockwise from top right) Trigger Delay

(position), Time/div, Sample Rate, Number of Samples, and Sampling Mode (blank

when in real-time mode).

Trigger Descriptor Box

Trigger descriptor box shows: (clockwise from top right) Trigger Source and Coupling,

Trigger Level (V), Slope, Trigger Type, Trigger Mode.

Setup information for Horizontal cursors, including the time between cursors and the

frequency, is shown beneath the TimeBase and

Trigger descriptor boxes. See the Cursors section for more information.

922499 Rev B