User Manual



Figure16‐InstallationCom plete
9. ClicktheFinishbuttontoclosethewizard.

10. SincetheEthernetComProbeinstallsasaNICcardonyourPCwithanewMACaddress,we
recommendthatyourestartthePCfortheComProbetoworkcorrectly.

TheinstallationoftheNetDecodersoftwareandtheEthernetComProbedriverarenowcomplete.
ConfigureEthernetComprobe
AfteryouinstallWinPcap,youhavetoconfiguretheIPaddressandSubnetMaskfortheEthernet
ComProbe.
1. SelectNetworkConnectionsfromtheControlPanel.

Figure17‐NetworkConnections
2. RightclickontheLACfortheEthernetComProbeandselectProperties.
Page|10