User Manual



Figure21‐PropertiesDialog
5. SelecttheUsethefollowingIPaddressradiobutton.

6. Enter192.168.0.1fortheIPaddress.
7. Enter255.0.0.0intheSubnetmask.
8. SelectOKtoclosethePropertiesdialog.
9. SelectOKagaintoclosetheLACPropertiesdialogandcompletetheprocess. 
Windows7Installation
TheprocedureforinstallingtheComProbedriverisdifferentforWindows7thanitisforXP.Followthe
stepsbelow.
1. PlugtheComProbeintoaUSBport.TheFoundNewHardwareWizarddialogueboxappears,
thendisappears.

Thenamessagesimilartothisoneappears/disappears indicatingthatthedriversoftwarehasnotbeen
installed.
Page|12