User Manual


MonitoringControlSignals
(DeviceNetandSerialAnalysisOnly)
TheBreakoutBoxmonitorscontrolsignalsinreal‐time.TheSignalDisplayisanoverviewofallsignal
changesinthecapturebuffer.
BreakoutBox
ClicktheBreakoutBoxicon ontheControlwindowtoolbartoopentheBreakoutBoxwindow.
TheBreakoutBoxmonitorsthesixmaincontrolsignalsonanRS‐232circuit.Itdisplaysacountofhow
manytimeseachsignalhaschangedsincetheBreakoutBoxwasopened,andshowsthestateofthe
signalusinggreenandredsymbolsandlinecharts.
SignalDisplay
ClicktheSignalDisplayiconontheControlwindowtoolbartoopentheSignalDisplay.
TheSignalDisplayshowsthestateofthecontrolsignalsinthecapturefileovertime.WiththeSnapTo
featureon,clickonanycontrolsignallineandthecontrolwilljumptothenearestsignalchange.
TheSignalDisplayissynchronizedwiththeEventDisplay.ClickonanysignalchangeintheSignal
DisplayandthecorrespondingeventwillbeautomaticallyselectedintheEventDisplay. 
ClicktheFindicontosearchforsignalchanges.Ifyouarecapturingdata,youcanupdatetheSignal
DisplaybyclickingtheNewSnapshoticon .

EXITINGNETDECODER
ToexitNetDecoder,gototheFilemenuontheControlwindow,andchooseExitNetDecoder,orclose
theControlwindowusingtheXiconinthetoprightcornerofthetitlebar.

Page|27