Data Sheet

PP007-WR
PP007-WS
Passive Probe
LEADING FEATURES
• Compact probe head
• Supports fine pitch SMD probing
• Rugged, sharp tip
• HF optimized connection
accessories
• Over 30 accessories
• Low input capacitance
TECHNICAL SPECIFICATIONS
Electrical Characteristics:
Attenuation: ÷ 10
Bandwidth: > 500 MHz
Input R: 10 MΩ
Input C: 9.5 pF
Max. Input 400 V CAT I
Voltage (1250 V surge)
300 V CAT II
General Characteristics:
Ground Sleeve
Diameter: 2.5 mm
Input Pin
Diameter: 0.5 mm
Cable Length: 1.3 m
The PP007 is designed to be an ideal general purpose probe. It features 500 MHz bandwidth, rugged
design and a wide assortment of accessories.
Probing
Solutions
Updated Passive Probe
The PP007 embodies leading technology
in passive probe design. The small probe is
optimized for maximum waveform fidelity,
including high frequency signal components,
in a rugged probe suitable for every day.
The sharp probe tip* is spring loaded,
allowing it to retract into the narrow probe
head. The tip does not slip off the object
being probed—important when probing
small geometry surface-mounted compo-
nents.Probing dense circuits is easier with
the small 2.5 mm ground sleeve, which
provides much better visibility than 5 mm
and 3.5 mm probes.
Optimized for HF Applications
The input capacitance of the probe is
very low for a passive probe—to minimize
loading of high frequency signals. However,
keeping any resonance beyond the passband
also requires low inductance in the intercon-
nections. Probes with limited interconnection
accessories often force the user to extend
the input or ground lead lengths to connect
to the circuit—a practice that adds inductance
and lowers the resonate frequency.
Accessories such as the ground spring
and innovative ground blade (PK007-013)
provide a very low inductance ground
interconnect. Copper foil tape, (PK007-014)
included with the probe, can be placed on
top of an IC and connected to its ground
pins to create a convenient ground plane
* A rigid tip is included