Information

10
CURRENT PROBES
Teledyne LeCroy
Current Probes
Model Numbers:
AP015
CP030
CP031
CP150
CP500
DCS015
DCS015 – Deskew
Calibration Source for AP015
The DCS015 calibration source has
both voltage and current time-
aligned signals, which enables the
precise deskew of voltage and
current probes. Most voltage probes
along with the CP031, CP030 and
AP015 are compatible with the
DCS015.
CP031 – 30A, 100 MHz
The CP031 is Teledyne LeCroy’s
highest bandwidth current probe.
Along with the high 100 MHz
bandwidth the CP031 can probe
continuous currents of 30 A
rms
and peak currents up to 50 A.
The CP031 features a small form
factor making it easier to probe on
a crowded, compact board.
CP030 – 30 A, 50 MHz
The CP030 was designed with
a small form factor for today’s
crowded boards. The small jaw
can probe currents in tight spaces
and still clamp onto conductors up
to 5 mm in diameter. Continuous
currents of 30 A
rms
and peak
currents of 50 A can be measured
by the CP030, which also features
a 50 MHz bandwidth.
AP015 – 30 A, 50 MHz
The AP015 current probe can
measure continuous current of
30 A
rms
and peak pulses of up to
50 A for durations up to 10 sec-
onds. This probe also features
an overheating protection circuit,
which will display an on-screen
warning to the user to prevent
damage. A probe unlock detection
feature is also built in to the AP015
to ensure accurate measurements.