Information

11
CURRENT PROBES
Ordering Information
Product Description Product Code
30 A; 50 MHz Current Probe - AC/DC; 30 A
rms;
50 A
peak
Pulse
AP015
30 A; 50 MHz Current Probe - AC/DC; 30 A
rms;
50 A
peak
Pulse
CP030
30 A; 100 MHz Current Probe - AC/DC; 30 A
rms;
50 A
peak
Pulse
CP031
Product Description Product Code
150 A; 10 MHz Current Probe - AC/DC; 150 A
rms;
500 A
peak
Pulse
CP150
500 A; 2 MHz Current Probe - AC/DC; 500 A
rms;
700 A
peak
Pulse
CP500
Deskew Calibration Source for AP015 DCS015
Specications
AP015 CP030
*†
CP031
*†
CP150 CP500
Electrical Characteristics
Max. Continuous Input Current
30 A 150A 500 A
Bandwidth
50 MHz 50 MHz 100 MHz 10 MHz 2 MHz
Max. Peak Current at Pulse Width
50 A
≤ 10 s 50 A ≤ 10 µs 500 A ≤ 30 µs 700 A
Rise Time (typical)
≤ 7 ns ≤ 3.5 ns
< 35 ns < 175 ns
Minimum Sensitivity 10 mA/div 200 mA/div
Max. In-Phase Current - 500 A 1150 A
Low-Frequency Accuracy
1%
AC Noise
-
≤ 2.5 mA ≤ 25 mA 25 mA
Coupling
AC, DC, GND
General Characteristics
Cable Length
2 m 1.5 m
2 m
6 m
Weight 300 g 240 g 500 g 630 g
Max. Conductor Size (Diameter) 5 mm 20 mm
Interface
ProBus, 1 M
Ω only
‡
Usage Environment
Indoor
Operating Temperature
0
˚ C to 40˚ C
Max. Relative Humidity
80%
Max. Altitude
2000 m
Maximum Insulated Wire Voltage
300 V CAT I
300 V CAT I,
150 V CAT II
600 V CAT I, 300 V CAT II
* Guaranteed at 23 °C ±3 °C
† The CP031 and CP030 are compatible with Teledyne LeCroy oscilloscopes running rmware version 4.3.1.1 or greater.
‡ Requires AP-1M for use with 50 Ω input only oscilloscopes
CP150 – 150 A, 10 MHz
Features:
•
150 A
rms
continuous current
•
500 A
peak
•
10 MHz bandwidth
CP500 – 500 A, 2 MHz
Features:
•
500 A
rms
continuous current
•
700 A
peak
•
2 MHz bandwidth