Information

42
PASSIVE PROBES
Teledyne LeCroy
Passive Probe
Model Numbers:
PP005A
PP006A
PP007-WR-1
PP008-1
PP009-1
PP010-1
PP011-1
PP016
PP017
PP018
Ordering Information
Product Description Product Code
÷10, 500 MHz 10 MΩ Passive Probe PP005A
÷10, 500 MHz 10 MΩ Passive Probe PP006A
÷10, 500 MHz 10 MΩ Passive Probe PP007-WR-1
÷10, 500 MHz 10 MΩ Passive Probe PP008-1
÷10, 500 MHz 10 MΩ Passive Probe PP009-1
÷10, 200 MHz 10 MΩ Passive Probe PP010-1
÷10, 500 MHz 10 MΩ Passive Probe PP011-1
÷10, 300 MHz 10 MΩ Passive Probe PP016
÷10, 250 MHz 10 MΩ Passive Probe PP017
÷10, 500 MHz 10 MΩ Passive Probe PP018
Passive Probes Selection Guide Specications
Types Bandwidth Input R Input C Attenuation Maximum Diameter
(MHz) (Ω) (pF) Voltage (mm)
PP005A 500 10 M 11 ÷10 500 V 5
PP006A 500 10 M 12 ÷10 600 V 5
PP007-WR-1 500 10 M 9.5 ÷10 400 V 2.5
PP008-1 500 10 M 9.5 ÷10 400 V 2.5
PP009-1 500 10 M 9.5 ÷10 400 V 2.5
PP010-1 500 10 M 9.5 ÷10 400 V 2.5
PP011-1 50 10 M 9.5 ÷10 400 V 5
PP016 300 MHz/ 10 MΩ/ 12 pF/ ÷10/ 600 V 5 mm
10 MHz 1 MΩ 46 pF ÷1
PP017 200 MHz 10 MΩ 12 pF ÷10 600 V 5 mm
PP018 500 MHz
10 MΩ 10 pF ÷10 600 V 5 mm
Each passive probe is recommended for a certain oscilloscope, using the
right passive probe with the right oscilloscope means that the probe can
be properly compensated across the entire bandwidth. Using probes with a
different oscilloscope will only let you compensate for low frequencies.
Features
•
Bandwidth from 200 MHz to 500 MHz
•
Probe encoding ring for automatic scale factor readout on Teledyne
LeCroy oscilloscopes