Datasheet
quantumdata
™
780AH
Handheld Test Instrument
with 297MHz for 4K Testing
Key Features
HDMI input and output ports for
testing both source display devices
as well as cables and distribution
networks
Test Ultra High Definition video
products supporting 4K resolutions
up to 300 MHz
Video pattern and format library
with programmable settings
Protocol tests for digital video
sources and displays, including
test for HDCP 2.2 authentication
Protocol logging application
auxiliary channel analyzer (ACA)
enables real time monitoring of
EDID exchanges, SCDC, HDCP
(including HDCP 2.2) transactions
and CEC messages
Passive protocol logging between a
source and a sink is also optionally
supported on HDMI ports
NEW! Report File Creation feature
provides HTML formatted report of
tests performed
Teledyne LeCroy’s quantumdata
780AH Handheld Test Instrument is a
battery powered portable, handheld digital video generator and
analyzer that enables you to run tests on digital video devices and
network distribution devices on site or in the R&D lab. The HDMI ports
support testing up to 300 MHz pixel rate. Testing these HDMI devices
is supported by both an output port and an input port to allow testing of
HDMI video sources, displays, audio devices and distribution devices.
The 780AH also offers a VGA output for testing RGB and component
analog.
Diagnose and Troubleshoot
The 780AH model provide a status bar
on the bottom of the touch screen. The
status bar provides basic information
about what the instrument is
transmitting to a display. The
instruments can run quick video audio
and protocol tests on individual sources,
displays , repeaters, distribution gear as
well as cables. Protocol tests include
tests for EDID, HDCP authentication,
infoframes and timing data. You can
place the 780AH at any point in a video
distribution network and run tests
upstream toward the source while
emulating a display (or sink). Or you
can run tests downstream while
emulating a source. Generate reports to
demonstrate test series completion.
Ease of Use
The 780AH’s color touch screen
provides ease of use. The rich set of
routine tests and diagnostic tests are
accessible with just a few touch
clicks. You can quickly configure
settings on the outputs. A rich
command set, available either through
USB or RS-232 serial ports, supports
automated testing.
DRAFT #1
v0913
1-800-909-7211
teledynelecroy.com
©2016 Teledyne LeCroy. All rights reserved. Specifications, prices, availability and delivery subject to change without notice.
Product or brand names are trademarks or requested trademarks of their respective holders.
Local sales offices are located throughout the world.
Visit our website to find the most convenient location.
SPECIFICATIONS
HDMI
Version
HDMI 2.0
Standard Formats
VESA (DMT, CVT
-R, CVT), CEA
Connector
(1) Type A
Tx; (1) Type A Rx
Protocol
HDMI,
DVI
Video
Colorimetry
ITU
-R BT.601-5, ITU-R BT.709-5
Video
Max Pixel Rate
300 MHz (300
Gbps/channel TMDS rate)
Color
Depths
8, 10, 12 bits
Video
Encoding / Sampling
RGB,
YCbCr; 4:4:4, 4:2:2, 4:2:0
HDCP
Versions
1.4 & 2.2
Audio Formats
LPCM, Dolby (DD, DD+,
TrueHD), DTS (ES, HD, Master Audio)
Audio LPCM
Settings
Sampling rates (32
– 192 kHz); Bits per sample (16, 20, 24)
Analog Video
Connector
VGA HD
-15
Format
Standards
VESA,
CEA
Video
Encoding
RGB,
YPbPr
Max Pixel Rate
80 MHz (higher resolutions
supported through pixel repetition)
Digital Audio
Connectors
Optical (JIS FOS);
SPDIF (RCA)
Audio Formats
LPCM, Dolby (DD, DD+), DTS (ES, HD)
Audio LPCM
Settings
Sampling rates (32
– 192 kHz); Bits per sample (16, 20, 24)
Instrument
Battery
6AA
NiMh batteries. 2 hours between charge. Overnight charge required.
AC Adapter
100
-120 VAC, 47-63Hz; 0.4 amps max
Weight
3.25 LBS; 1.47 Kg
Embedded
Display
480 (H); x 272 (V) resolution; 24 bit RGB color.
Tilt
Bail
For convenient viewing
Size
Height: 2.7 in. (6.98 cm) Width: 9.75 in. (24.76 cm) Depth: 6 in. (15.24 cm)
Command Line
Control
USB Type B
Environmental
Operating Temp: 32 to 104 (F);
0 to 40 (C)
File
Access
USB Type B (command line / file
transfer; SD Card (upgrades / file transfer)
Options
Cable Test
Test digital
video cables and video distribution networks
Netwrok
Analyzer
Protocol
testing of sources and sinks
ACA Monitor (emulation)
Monitor aux
channel and CEC bus while emulating a source or sink device
ACA Monitor (passive)
Monitor
aux channel and CEC bus passively between source and sink devices
Report File Creation
NEW!
Provides
HTML formatted report of tests performed