Datasheet

quantumdata
™
780BH
Video Generator /
Protocol Analyzer
For HDMI Testing
Key Features
 HDMI input and output ports for
testing both source display devices
as well as cables and distribution
networks
 Test Ultra High Definition video
products supporting 4K resolutions
up to 300 MHz
 Video pattern and format library
with programmable settings for
video pattern testing of displays
 Protocol tests for digital video
sources and displays, including
test for HDCP 2.2 authentication
 Protocol logging application
auxiliary channel analyzer (ACA)
enables real time monitoring of
EDID exchanges, SCDC, HDCP
(including HDCP 2.2) transactions
and CEC messages
 Passive protocol logging between a
source and a sink is also optionally
supported on HDMI ports with
additional hardware
 NEW! Report File Creation feature
provides HTML formatted report of
tests performed
The Teledyne LeCroy quantumdata 780BH HDMI Generator / Analyzer is
a battery powered portable, handheld digital video generator and
analyzer that enables you to run tests on digital video devices and
network distribution devices on site or in the R&D lab. The HDMI ports
support testing up to 300 MHz pixel rate. Testing these HDMI devices
is supported by both an output port and an input port to allow testing of
HDMI video sources, displays, audio devices and distribution devices.
The 780BH also offers a VGA output for testing RGB and component
analog.
Diagnose and Troubleshoot
The 780BH model provide an at-a-
glance status bar on the bottom of the
7” in touch screen. The status bar
provides basic information about what
the instrument is transmitting to a
display and what it is receiving from a
source. The instruments can run quick
video audio and protocol tests on
individual sources, displays , repeaters,
distribution gear as well as cables.
Protocol tests include tests for EDID,
HDCP authentication, infoframes and
timing data. You can place the 780BH
at any point in a video distribution
network and run tests upstream toward
the source while emulating a display (or
sink). Or you can run tests downstream
while emulating a source. Generate
reports to demonstrate test series
completion.
Ease of Use
The 780BH’s large color touch screen
provides ease of use and quick status
information. The rich set of routine
tests and diagnostic tests are
accessible with just a few touch
clicks. You can quickly configure
settings on the outputs. A rich
command set, available either through
USB or RS-232 serial ports, supports
automated testing.
DRAFT #1
v0128
1-800-909-7211
teledynelecroy.com
©2018 Teledyne LeCroy. All rights reserved. Specifications, prices, availability and delivery subject to change without notice.
Product or brand names are trademarks or requested trademarks of their respective holders.
Local sales offices are located throughout the world.
Visit our website to find the most convenient location.
SPECIFICATIONS
HDMI
Version
HDMI 2.0
Standard Formats
VESA (DMT, CVT
-R, CVT), CEA
Connector
(1) Type A
Tx; (1) Type A Rx
Protocol
HDMI,
DVI
Video
Colorimetry
ITU
-R BT.601-5, ITU-R BT.709-5
Video
Max Pixel Rate
300 MHz
(3.00 Gbps/channel TMDS rate)
Color
Depths
8, 10, 12 bits
Video
Encoding / Sampling
RGB,
YCbCr; 4:4:4, 4:2:2, 4:2:0
HDCP
Versions
1.4 & 2.2
Audio Formats
LPCM, Dolby (DD, DD+,
TrueHD), DTS (ES, HD, Master Audio)
Audio LPCM
Settings
Sampling rates (32
– 192 kHz); Bits per sample (16, 20, 24)
Analog Video
Connector
VGA HD
-15
Format
Standards
VESA,
CEA
Video
Encoding
RGB,
YPbPr
Max Pixel Rate
80 MHz (higher resolutions
supported through pixel repetition)
Instrument
Battery
6AA
NiMh batteries. 2 hours between charge. Overnight charge required.
AC Adapter
100
-120 VAC, 47-63Hz
Weight
3.25 LBS; 1.47 Kg
Embedded
Display
800 (H); x 480 (V) resolution; 24 bit RGB color.
Tilt
Bail
For convenient viewing
Size
Height: 2.7 in. (6.98 cm) Width: 9.75 in. (24.76 cm) Depth: 6 in. (15.24 cm)
Command Line
Control
USB Type B, RS
-232
Environmental
Operating Temp: 32 to 104 (F);
0 to 40 (C)
File
Access
USB Type B (command line / file
transfer; SD Card (upgrades / file transfer)
Digital Audio
Connectors
Optical (JIS FOS);
SPDIF (RCA)
Audio Formats
LPCM, Dolby (DD, DD+), DTS (ES, HD)
Audio LPCM
Settings
Sampling rates (32
– 192 kHz); Bits per sample (16, 20, 24)
Options
Auto EDID Test
Run automated EDID
test on source devices
Cable Test
Test digital
video cables and video distribution networks
ACA Monitor (emulation)
Monitor aux channel and CEC bus
while emulating a source or sink device
ACA Monitor (passive)
Monitor
aux channel and CEC bus passively between source and sink devices
Report File Creation
NEW!
Provides HTML formatted report of tests performed
Important Note: The model name and description
for this 780 model has been changed to:
“780BH Video Generator / Protocol Analyzer for HDMI Testing.”