Datasheet
quantumdata
™
780D
Video Generator /
Protocol Analyzer
for HDMI & HDBaseT Testing
Key Features
HDMI and HDBaseT input and
output ports for testing both
source display devices as well as
cables and distribution networks
Test Ultra High Definition video
products supporting 4K resolutions
up to 600 MHz
Video pattern and format library
with programmable settings
Protocol tests for digital video
sources and displays, including
test for HDCP 2.2 authentication
Protocol logging application
auxiliary channel analyzer (ACA)
enables real time monitoring of
EDID exchanges, HDCP (including
HDCP 2.2), SCDC and CEC
messages
Passive protocol logging between a
source and a sink is also optionally
supported on HDMI ports
Report File Creation feature
provides HTML formatted report of
tests performed
The Teledyne LeCroy quantumdata 780D Video Generator /Protocol
Analyzer for HDMI & HDBaseT Testing is a portable, handheld digital
video generator and analyzer that enables you to run tests on digital
video devices and network distribution devices on site or in the R&D
lab. The HDMI ports support testing up to 600 MHz pixel rate and the
HDBaseT ports support testing up to 300 MHz pixel rate. Testing these
digital interfaces is supported by both an output port and an input port
to allow testing of digital video sources, displays, audio devices and
distribution devices. The 780D also offers a VGA output for testing
RGB and component analog.
Diagnose and Troubleshoot
The 780D model provide an at-a-glance
status bar on the bottom of the 7” in
touch screen. The status bar provides
basic information about what the
instrument is transmitting to a display
and what it is receiving from a source.
The instruments can run quick video
audio and protocol tests on individual
sources, displays , repeaters,
distribution gear as well as cables.
Protocol tests include tests for EDID,
HDCP authentication, infoframes and
timing data. You can place the 780D at
any point in a video distribution network
and run tests upstream toward the
source while emulating a display (or
sink). Or you can run tests downstream
while emulating a source. Generate
reports to demonstrate test series
completion.
Ease of Use
The 780D’s large color touch screen
provides ease of use and quick status
information. The rich set of routine
tests and diagnostic tests are
accessible with just a few touch
clicks. You can quickly configure
settings on the outputs. A rich
command set, available either
through USB or RS-232 serial ports,
supports automated testing.
DRAFT #3
v0128
1-800-909-7211
teledynelecroy.com
©2018 Teledyne LeCroy. All rights reserved. Specifications, prices, availability and delivery subject to change without notice.
Product or brand names are trademarks or requested trademarks of their respective holders.
Local sales offices are located throughout the world.
Visit our website to find the most convenient location.
SPECIFICATIONS
HDMI
Version
HDMI 2.0
Standard Formats
VESA (DMT, CVT
-R, CVT), CEA
Connector
(1) Type A
Tx; (1) Type A Rx
Protocol
HDMI,
DVI
Video
Colorimetry
ITU
-R BT.601-5, ITU-R BT.709-5, BT.2020 (Rx only currently)
Video
Max Pixel Rate
600 MHz (6.00
Gbps/channel TMDS rate)
Color
Depths
8, 10, 12 bits (deep color only supported
up to 1080p60 formats)
Video
Encoding / Sampling
RGB,
YCbCr; 4:4:4, 4:2:2, 4:2:0
HDCP
Versions
1.4 & 2.2
Audio Formats
LPCM, Dolby (DD, DD+,
TrueHD), DTS (ES, HD, Master Audio)
Audio LPCM
Settings
Sampling rates (32
– 192 kHz); Bits per sample (16, 20, 24)
HDBaseT
Version
HDBaseT 1.0
Standard
Formats
VESA (DMT, CVT
-R, CVT), CEA
Connector
(1) 8P8C (RJ
-45) Tx; (1) RJ-45 Rx
Video
Colorimetry
ITU
-R BT.601-5, ITU-R BT.709-5
Video
Max Pixel Rate
300 MHz
Color
Depths
8, 10, 12 bits
Video
Encoding / Sampling
RGB,
YCbCr; 4:4:4, 4:2:2, 4:2:0
HDCP
Version
1.4
Audio Formats
LPCM, Dolby (DD, DD+,
TrueHD), DTS (ES, HD, Master Audio)
Audio LPCM
Settings
Sampling rates (32
– 192 kHz); Bits per sample (16, 20, 24)
Analog Video
Connector
VGA HD
-15
Format
Standards
VESA,
CEA
Video
Encoding
RGB,
YPbPr
Max Pixel Rate
165 MHz
Instrument
AC Adapter
100
-120 VAC, 47-63Hz
Weight
3.25 LBS; 1.47 Kg
Embedded
Display
800 (H); x 480 (V) resolution; 24 bit RGB color.
Tilt
Bail
For convenient viewing
Size
Height: 2.7 in. (6.98 cm) Width: 9.75 in. (24.76 cm) Depth: 6 in. (15.24 cm)
Command Line
Control
USB Type B, RS
-232
Environmental
Operating Temp: 32 to 104 (F);
0 to 40 (C)
File
Access
USB Type B (command line / file
transfer; SD Card (upgrades / file transfer)
Digital Audio
Connectors
Optical (JIS FOS);
SPDIF (RCA)
Audio Formats
LPCM, Dolby (DD, DD+), DTS (ES, HD)
Audio LPCM
Settings
Sampling rates (32
– 192 kHz); Bits per sample (16, 20, 24)
Options
Auto EDID Test
Run automated EDID
test on source devices
Cable Test
Test digital
video cables and video distribution networks
ACA Monitor
Monitor aux channel transactions while emulating a source or sink or passively
Report File Creation
Provides HTML formatted report of tests performed
NEW!
Dolby Vision
Dolby
Vision test image
Important Note: The model name and description
for this 780 model has been changed to:
“780D Video Generator / Protocol Analyzer for HDMI & HDBaseT Testing.”