Datasheet

ManualsBrandsTeledyne LeCroy ManualsFunction GeneratorsTeledyne LeCroy T3AFG80 Mains-powered 0.000001 Hz - 80 MHz 2-channel Sinus, Rectangle, Triangle, Pulse, Noise, Arbitrar

Debug with Condence

40 MHz – 120 MHz

Teledyne Test Tools T3AFG40 / T3AFG80 / T3AFG120

range of function/arbitrary generators are a series of

dual-channel waveform generators with specications

of up to 120 MHz maximum bandwidth, 1.2 GSa/s

maximum sampling rate and 16-bit vertical resolution.

The proprietary Arbitrary & Pulse techniques used in

the T3AFG40 / T3AFG80 / T3AFG120 models helps

to solve the weaknesses inherent in traditional DDS

generators when generating arbitrary, square and pulse

waveforms. With the above advantages the T3AFG40 /

T3AFG80 / T3AFG120 generators can provide users with

avariety of high delity and low jitter signals, which can

meet the growing requirements of a wide range of

complex applications.

Tools for Improved Debugging



Deep Memory – 8 Mpts/Ch.

Generate complex arbitrary waveforms.



Wide Range of Modulation Types – AM, DSB-AM,

FM, PM, FSK, ASK, PWM, Sweep, Burst, and PSK.

Quickly set up modulated waveforms.



High Resolution – 16 bit resolution.

Generate waveforms with low noise, low spurious

signal content and high dynamic range.



Bandwidth Models up to 120 MHz.

Wide choice of bandwidths.



Built In Arbitrary Waveforms.

Load and replay built in Arbitrary Waveforms.



User Dened Waveforms.

Store and recall user dened waveforms.



Lower cost 5 MHz and 10 MHz single channel models

are also available.

Enquire about the T3AFG5 and T3AFG10.

Key Specications

Bandwidth 40 MHz, 80 MHz, 120 MHz

Channels 2 Independent Channels

Memory 8 Mpts/Ch

Sample Rate 1.2 GS/s

Display 4.3 inch Touch Screen TFT LCD

Connectivity USB Host, USB Device, LAN

T3AFG40/T3AFG80/T3AFG120 Data Sheet

Function/Arbitrary Waveform Generators

Summary of content (10 pages)

PAGE 1
T3AFG40/T3AFG80/T3AFG120 Data Sheet Function /Arbitrary Waveform Generators Debug with Confidence 40 MHz – 120 MHz Teledyne Test Tools T3AFG40 / T3AFG80 / T3AFG120 range of function/arbitrary generators are a series of dual-channel waveform generators with specifications of up to 120 MHz maximum bandwidth, 1.2 GSa/s maximum sampling rate and 16-bit vertical resolution.
PAGE 2
PRODUCT OVERVIEW Ordering Information Model Bandwidth Channel Memory per Ch Sample Rate per Ch T3AFG40 40 MHz 2 8 Mpts 1.2 GS/s T3AFG80 80 MHz 2 8 Mpts 1.2 GS/s T3AFG120 120 MHz 2 8 Mpts 1.
PAGE 3
Sweep mode supports ‘Linear’ and ‘Log’ sweep, with ‘Up’ and ‘Down’ direction, and Sweep source can be configured as ‘Internal’, ‘External’ or ‘Manual’. Sine wave output exhibits almost no spurious artefacts at 60 MHz and 0 dBm. The Teledyne Test Tools T3AFG40 / T3AFG80 and T3AFG120, with its low jitter design, can generate waveforms with exceptional edge stability. With better jitter performance comes better edge stability, and higher confidence in your circuit design.
PAGE 4
PRODUCT OVERVIEW 14 Bit Resolution 16 Bit Resolution 14 Bit Resolution 16 Bit Resolution Less accurate waveform generation ●● T3AFG40 / T3AFG80 / T3AFG120 are all 16 bit resolution ●● 4 x higher resolution than 14 bit systems ●● Lower levels of Harmonic Distortion ●● Lower levels of non-harmonic spurious signals ●● Improved dynamic range ●● Enhanced signal fidelity I/O Connectivity ●● LAN and USB connection ●● 10 MHz Reference Input/Output ●● Aux Input/Output ●● External modulation
PAGE 5
SPECIFICATIONS Frequency Specification Model T3AFG40 T3AFG80 Waveform Sine Square Pulse Ramp/Triangular Gaussian white noise Arbitrary Resolution Accuracy Sine, Square, Ramp, Pulse, Noise, Arbitrary 1 μHz ~ 40 MHz 1 μHz ~ 80 MHz 1 μHz ~ 25 MHz 1 μHz ~ 25 MHz 1 μHz ~ 1 MHz > 40 MHz (-3 dB) > 80 MHz (-3 dB) 1 μHz ~ 20 MHz 1 μHz 10-year aging +/- 3.5 ppm at 25 Degrees C T3AFG120 1 μHz ~ 120 MHz 120 MHz (-3 dB) Sine Wave Harmonic Distortion Total harmonic distortion.
PAGE 6
SPECIFICATIONS DC Characteristics Range Accuracy -10 V to +10 V HiZ Load -5 V to +5 V 50 Ohm Load +/- (1 % + 2 mV) HiZ Load Harmonic Output Characteristics Order Type 10 All, Even, Odd Output Characteristics Range Accuracy Amplitude Flatness Output impedance Output current Channel to channel Crosstalk 2 mV – 20 Vpp ≤ 20 MHz HiZ load, 2 mV – 10 Vpp >20 MHz HiZ load. Values are halved into 50 Ω load +/- (1 % + 1 mVpp) 10 kHz sine wave, 0 V offset +/- 0.3 dB, 0 – 100 MHz, 50 Ω load, 2.
PAGE 7
Modulation Characteristics – PWM Carrier Modulation Source Modulating Waveform Modulation Frequency Pulse Width Deviation Resolution Pulse Internal/External Sine, Square, Ramp, Noise, Arb 1 mHz to 1 MHz with ‘internal’ modulation source Minimum 6.
PAGE 8
SPECIFICATIONS Sync Output V out Low V out High Output Impedance Maximum Frequency Pulse Width Maximum 0.44 V at 8 mA Mimimum 3.
PAGE 9
Ordering information Models Standard Accessories T3AFG40 40 MHz T3AFG80 80 MHz T3AFG120 120 MHz Quick Start Guide USB Cable BNC Cable Calibration Certificate Power Cord 9
PAGE 10
ABOUT TELEDYNE TEST TOOLS Company Profile Teledyne LeCroy is a leading provider of oscilloscopes, protocol analyzers and related test and measurement solutions that enable companies across a wide range of industries to design and test electronic devices of all types. Since our founding in 1964, we have focused on creating products that improve productivity by helping engineers resolve design issues faster and more effectively.