Data Sheet

13
Auxiliary input and output characteristics
T3AWG3252
Marker Output
connector type BNC on Front panel
Number of connectors one
Output impedance 50 Ω
Output level (into 50 Ω)
Amplitude 1 V to 2.5 V
Resolution 10 mV
Accuracy ± (2 % setting + 10 mV)
Rise/Fall Ttime (10 % to 90 %, 2.5 V
pp
) < 700 ps
Jitter (rms) 20 ps
Marker out to analog channel skew
Range Variable Clock Mode: 0 to 3 μs
AFG Mode: 0 to 14 s. in continuos mode, 0 to 3 μs in Trig. Mode
Resolution Variable Clock Mode: 78 ps, AFG Mode: 39 ps
Accuracy ± (1% setting + 140 ps)
Initial skew < 1 ns
Trigger/Gate Input
Connector type BNC on the Front Panel
Input impedance 50 Ω / 1 KΩ
Slope/Polarity Positive or Negative or both
Input damage level < -15 V or > +15 V
Threeshold control level - 10 V to 10 V
Resolution 50 mV
Threshold control accuracy ± (10 % | setting | + 0.2 V)
Input voltage swing 0.5 V
p-p
minimum
Minimum pulse width (1 V
pp
) 3 ns
Initial trigger/gate delay to
Analog Output
Variable Clock Mode: < 240 * DAC clock period +32 ns
AFG Mode: < 360 ns (< 420 ns in troggeed sweep mode)
Trigger in to output jitter AFG Mode: < 40 ps
Variable Clock Mode: 0.29 * DAC clock period
Maximum frequency AFG: 65 Mpts on Rising/Falling Edge, 80 MTps on both edges
Variable Clock Mode: 42.5 MTps
MTps = Mega Transition per second
Reference clock input
Connector type SMA on rear panel
Input impedance 50 Ω AC coupled
Input Voltage range -4 dBm to 11 dBm sine or square wave
Damage level +14 dBm
Frequency range 5 MHz to 100 MHz
Reference clock output
Connector type SMA on rear panel
Output impedance 50 Ω AC coupled
Frequency range 10 MHz
Accuracy ± 2.0 x 10-6
Aging ± 1.0 x 10-6/year
Amplitude 1.65 V
Jitter (rms) < 20 ps