Data Sheet

14
T3AWG3252
External modulation Input
Connector type SMA on rear panel
Input impedance > 2 MΩ
Number of inputs One
Input Voltage Range -0,5 V to +0.5 V
Bandwidth 8 MHz with 40 MS/s sampling rate
Vertical resolution 8 bits
Power
Source Voltage and Frequency 100 to 240 VAC ±10 % @ 45–66 Hz
Max Power Consumption 100 W
Enviromental Characteristics
Temperature (operating) +5 °C to +40 °C (+41°F to 104 °F)
Temperature (non operating) -20 °C to +60 °C (-4 °F to 140 °F)
Humidity (operating) 5 % to 80 % relative humidity with a maximum wet bulb temperature of 29 °C at or below
+40 °C, (upper limit de-rates to 20.6 % relative humidity at +40 °C . Non-condensing.
Humidity (non-operating) 5 % to 95 % relative humidity with a maximum wet bulb temperature of 40 °C at or below
+60 °C, (upper limit de-rates to 29.8 % relative humidity at +60 °C. Non-condensing.
Altitude (operating) 3,000 meters (9,842 feet) maximum at or below 25 °C
Altitude (non operating) 12,000 meters (39,370 feet) maximum
EMC and safety
Safety EN61010-1
Main Standards EN 61326-1:2013 – Electrical equipment for measurement, control and laboratory use –
EMC requirements – Part 1: General requirements
Immunity EN 61326-1:2013
System specications
T3AWG3252
Display 7 inch, 1024 x 600, capacitive touch LCD
Operative System Windows 10 IoT – LTSB (Long Term Service Branch)
External Dimensions W 362 mm – H 143 mm – D 258 mm
Weight 6.5 kg
Front panel connectors CH1 OUTPUT (BNC)
CH2 OUTPUT (BNC)
MARKER OUT (BNC)
TRIGGER IN (BNC)
Rear panel connectors Ref. Clk. IN (SMA)
Ref. Clk. Out (SMA)
Ext. Mod. IN (SMA)
External monitor ports (HDMI, VGA or more)
DIGITAL POD A[7..0]
1x USB 2.0 and 1x USB 3.0 or more
Ethernet port (10/100/1000BaseT Ethernet, RJ45 port)
2 PS/2 keyboard and mouse ports
Hard Disk 240 GB SSD or better
Processor Intel® Celeron J1900, 2 GHz (or better)
Processor Memory 8 GB or better
MODEL SPECIFIC SPECIFICATIONS