Data Sheet

●
Automatic measurement function for 38 parameters
as well as Measurement Statistics, Zoom, Gating,
Math, History and Reference functions
●
1 Mpts FFT
●
Math and measurement functions use all sampled
data points (up to 14 Mpts)
●
Math functions (FFT, addition, subtraction,
multiplication,division, integration, differential, square
root)
●
Preset key can be customized for user settings or
factory “defaults”
●
Security Erase mode
●
High Speed hardware based Pass/ Fail function
●
MSO, 16 digital channels (four channel series only,
option)
Models and key Specifi cation
Model T3DSO1102
T3DSO1104
T3DSO1204
Bandwidth 100 MHz 200 MHz
SamplingRate (Max.) Two channel series have a single 1 GSa/s ADC, four channel series have two 1 GSa/s
ADCs. When all channels are enabled, each channel has a maximum sample rate of
500 MSa/s. When a single channel per pair is active, that channel has sample rate of
1GSa/s
Channels 4 (four channel series)
2+EXT (two channel series)
Memory Depth (Max.) 7 Mpts/CH (not interleave mode);
14 Mpts/CH (interleave mode)
Waveform Capture Rate (Max.) 100,000 wfm/s (normal mode), 400,000 wfm/s (sequence mode)
Trigger Type Edge, Slope, Pulse Width, Window, Runt, Interval, Dropout, Pattern, Video
Serial Trigger and decoder (Standard) IIC, SPI, UART/RS232, CAN, LIN
16 Digital Channels
(four channel series only, option)
Maximum waveform capture rate up to 1 GSa/s, Record length up to 14 Mpts/CH
USB AWG module
(four channel series only, option)
One channel, 25 MHz, sample rate of 125 MHz, wave length of 16 kpts
Bode plot ( four channel series only) Minimum start frequency of 10 Hz, minimum scan bandwidth of 500 Hz, maximum
scan bandwidth of 120 MHz (dependent on Oscilloscope and AWG bandwidth),
500 maximum scan frequency points
USB WIFI adapter
(four channel series only, option)
802.11b/g/b, WPA-PSK, the adapter must be purchased separately by the scope user
(TP-Link TL-WN725N)
I/O USB Host, USB Device, LAN, Pass/Fail, Trigger Out, Sbus (Teledyne Test Tools MSO)
Probe (Std) 2/4 pcs passive probe T3PP300 2/4 pcs passive probe T3PP300
Display 7 inch TFT-LCD (800 x 480)
Weight Four channel series: Without package 2.6 Kg; With package 3.8 Kg
Two channel series: Without package 2.5 Kg; With package 3.5 Kg
3
●
Bode plot (four channel series only)
●
Search and navigate (four channel series only)
●
USB AWG module (four channel series only, option)
●
USB WIFI adapter (four channel series only, option)
●
Web Browser based control (four channel series only)
●
Large 7 inch TFT-LCD display with 800 * 480 resolution
●
Multiple interface types: USB Host, USB Device
(USB-TMC), LAN, Trigger Out
●
Supports SCPI remote control commands
●
Supports Multi-language display and embedded
online help