T3DSO1000 Data Sheet Oscilloscopes Debug with Confidence 100 MHz – 200 MHz Front panel of the four channel series Front panel of the two channel series Tools for Improved Debugging ● ● ● ● ● ● Long Capture – 7 Mpts/Ch and 14 Mpts interleaved. Capture more time and show more waveform detail. Math and Measure – 7 basic math functions plus FFT and 38 automatic measurement parameters. Extract results from waveforms and measurements.
PRODUCT OVERVIEW T3DSO1102: 2 Channel 100 MHz T3DSO1104: 4 Channel 100 MHz T3DSO1204: 4 Channel 200 MHz Teledyne Test Tools new T3DSO1000 Oscilloscopes feature two channel and four channel models. The two channel model is available with 100 MHz analog bandwidth, a single ADC with a 1 GSa/s maximum sample rate, and a single memory module with 14 Mpts of sample memory. The four channel scope is available in 100 and 200 MHz models and incorporates two 1 GSa/s ADCs and two 14 Mpts memory modules.
Models and key Specification Model T3DSO1102 T3DSO1104 T3DSO1204 Bandwidth 100 MHz 200 MHz SamplingRate (Max.) Two channel series have a single 1 GSa/s ADC, four channel series have two 1 GSa/s ADCs. When all channels are enabled, each channel has a maximum sample rate of 500 MSa/s. When a single channel per pair is active, that channel has sample rate of 1 GSa/s Channels 4 (four channel series) 2+EXT (two channel series) Memory Depth (Max.
FUNCTION & CHARACTERISTICS 7 inch TFT-LCD display and 10 one-button menus When all channels are enabled, each channel has a maximum sample rate of 500 MSa/s.
256-Level Intensity Grading and Color Temperature Display History Waveforms (History) Mode and Segmented Acquisition (Sequence) New display technology provides for fast refresh rates. The resulting intensity-graded trace is brighter for events that occur with more frequency and dims when the events occur with less frequency. Playback the latest triggered events using the history function.
FUNCTION & CHARACTERISTICS 1 M points FFT 16 Digital Channels/MSO (four channel series only, option) The new math co-processor enables FFT analysis of incoming signals using up to 1 M samples per waveform. This provides high frequency resolution with a fast refresh rate. The FFT function also supports a variety of window functions so that it can adapt to different spectrum measurement needs.
Bode Plot (four channel series only) USB 25 MHz AWG Module (four channel series only, option) The four channel series supports an optional USB 25 MHz function/arbitrary waveform generator that is operated from the USB host connection. Functions include Sine, Square, Ramp, Pulse, Noise, DC and 45 built-in waveforms. The arbitrary waveforms can be accessed and edited by the Teledyne Test Tools PC software.
SPECIFICATIONS Acquire System Sampling Rate Memory Depth Peak Detect Average Eres Waveform interpolation 1 GSa/s (single channel/pair), 500 MSa/s (two channels/pair) Max 14 Mpts/Ch (single channel/pair), 7 Mpts/Ch (two channels/pair) 2 nsec (Four channel series) 4 nsec (Two channel series) Averages: 4, 16, 32, 64, 128, 256, 512, 1024 Enhance bits: 0.5, 1.5, 2, 2.5, 3; Selectable Sin(x)/x, Linear Input Channels Coupling Impedance Max.
Trigger System Trigger Mode Trigger Level Holdoff Range Trigger Coupling Coupling Frequency Response Coupling Frequency Response components below 10 KHz Trigger Sensitivity Trigger Jitter Trigger Displacement Auto, Normal, Single Internal: ± 4.5 div from the center of the screen EXT: ± 0.6 V (Two channel series) EXT/5: ± 3 V (Two channel series) 80 ns – 1.
SPECIFICATIONS Window Trigger Window Type Source Absolute, Relative All channels Interval Trigger Slope Limit Range Source Time Range Resolution Rising, Falling <,>,<>,>< All channels 2 ns ~ 4.2 s 1 ns Dropout Trigger Timeout Type Source Slope Time Range Resolution Edge, State All channels Rising, Falling 2 ns ~ 4.2 s 1 ns Runt Trigger Polarity Limit Range Source Time Range Resolution +wid , -wid <,>,<>,>< All channels 2 ns ~ 4.
UART / RS232 Trigger Condition Source (RX/TX) Data format Limit Range Data Length Data Width Parity Check Stop Bit Idle Level Baud (Selectable) (Custom) CAN Trigger Condition Source ID Data Format Data Length Baud Rate (Selectable) Baud Rate (Custom) LIN Trigger Condition Source ID Data Format Data Length Baud Rate (Selectable) Baud Rate (Custom) Start, Stop, Data, Parity Error All channels Hex =, >, < 1 byte 5 bit, 6 bit, 7 bit, 8 bit None, Odd, Even 1 bit, 1.
SPECIFICATIONS Measurement Source Number of Measurements Measurement Range Measurement Parameters (38 Types) Vertical (Voltage) Horizontal( Time) Delay Cursors Statistics Counter 12 All channels, All channels in Zoom, Math, All References, History Display 5 measurements at the same time Screen region, Gate region Max Highest value in input waveform Min Lowest value in input waveform Pk-Pk Difference between maximum and minimum data values Ampl Difference between top and base in a bimodal signal
Math Function Operation FFT window FFT display Number of Decoders + , - , * , / , FFT , d/dt , ∫dt , √ Rectangular, Blackman, Hanning, Hamming, Flattop Full Screen, Split, Exclusive 2 USB AWG Module (four channel series only, option) Channel Max. Output Frequency Sampling Rate Frequency Resolution Frequency Accuracy Vertical Resolution AmplitudeRange Waveform Type Output impedance Protection 1 25 MHz 125 MSa/s 1 μHz ± 50 ppm 14-bits -1.5 ~ +1.
SPECIFICATIONS Digital Channels (four channel series only, option) No. of Channels Max. Sampling Rate Memory Depth Min. Detectable Pulse Width Level Group Level Range Logic Type Skew[2] 16 1 GSa/s 14 Mpts/CH 4 ns D0~D7, D8~D15 -8 V ~ 8 V TTL, CMOS, LVCMOS3.3, LVCMOS2.5, custom D0~D15: ±1 sampling interval Analog To Digital: ± (1 sampling interval +1 ns) I/O Standard Pass/Fail USB Host, USB Device, LAN, Pass/Fail, Trigger Out 3.
Probes and Accessories Probe Model Passive Probes T3PP300 Picture Passive Probe, Bandwidth: 300 MHz Description Current Probes T3CP50 Bandwidth: 50 MHz, Max. continuous current: 30 Arms, Peak current: 50 A Switch Ratio: 100 mV/A, 1 V/A, Accuracy: 1 V/A (±1 % ±1 mA), 100 mV/A (±1 % ±10 mA), DC 12 V /1.
ABOUT TELEDYNE TEST TOOLS Company Profile Teledyne LeCroy is a leading provider of oscilloscopes, protocol analyzers and related test and measurement solutions that enable companies across a wide range of industries to design and test electronic devices of all types. Since our founding in 1964, we have focused on creating products that improve productivity by helping engineers resolve design issues faster and more effectively.