Data Sheet

9
Trigger System
Trigger Mode Auto, Normal, Single
Trigger Level Internal: ± 4.5 div from the center of the screen
EXT: ± 0.6 V (Two channel series)
EXT/5: ± 3 V (Two channel series)
Holdoff Range 80 ns – 1.5 s
Trigger Coupling AC
DC
LFRJ
HFRJ
Noise RJ
Coupling Frequency Response DC: Passes all components of the signal
AC: Blocks DC components and attenuates signals below 8 Hz
LFRJ: Blocks the DC component and attenuates the low-frequency components below 2 MHz
HFRJ: Attenuates the high-frequency components above 1.2 MHz
Coupling Frequency Response DC: Passes all components of the signal
LFRJ: Blocks the DC component and attenuates the low-frequency components below 10 KHz
HFRJ: Attenuates the high-frequency components above 500 KHz
components below 10 KHz Internal: ± 0.2 div
EXT (Two channel series): ± 0.4 div
Trigger Sensitivity DC – Max BW 0.6 div
EXT (Two channel series): 200 mVpp DC – 10 MHz
300 mVpp 10 MHz – BW frequency
EXT/5 (Two channel series): 1 Vpp DC – 10 MHz
1.5 Vpp 10 MHz – BW frequency
Trigger Jitter < 100 ps
Trigger Displacement Pre-Trigger: 0 – 100 % Memory
Delay Trigger: 0 to 10,000 div
Edge Trigger
Slope Rising, Falling, Rising & Falling
Source All channels/ EXT/ (EXT/5)/ AC Line (Two channel series)
All channels/ AC Line (Four channel series)
Slope Trigger
Slope Rising, Falling
LimitRange < , > , < > , > <
Source All channels
TimeRange 2 ns – 4.2 s
Resolution 1 ns
Pulse Trigger
Polarity +wid , -wid
Limit Range < , > , < > , > <
Source All channels
Pulse Range 2 ns ~ 4.2 s
Resolution 1 ns
Video Trigger
Signal Standard NTSC, PAL, 720p/50, 720p/60, 1080p/50, 1080p/60, 1080i/50, 1080i/60, Custom
Source All channels
Sync Any, Select
Trigger condition Line, Field