Data Sheet

9
Trigger System
Mode Auto, Normal, Single
Level Internal:±4.5divfromthecenterofthescreen
EXT:±0.6V
EXT/5:±3V
Holdoff Range 100ns~1.5s
Coupling AC, DC, LFRJ, HFRJ, Noise RJ (CH1 ~ CH4)
Coupling Frequency Response
(CH1 ~ CH4)
2)
DC: Passes all components of the signal
AC: Blocks DC components and attenuates signals below 8 Hz
LFRJ: Attenuates the frequency components below 900 kHz
HFRJ:Attenuatesthefrequencycomponentsabove500kHz
Coupling Frequency Response
(EXT)
2)
DC: Passes all components of the signal
AC: Blocks DC components and attenuates signals below 8 Hz
LFRJ: Attenuates the frequency components below 400 kHz
HFRJ: Attenuates the frequency components above 1 MHz
Accuracy
2)
CH1~CH4:±0.2div
EXT:±0.3div
Sensitivity CH1 ~ CH4: 0.6 div
EXT:200mVpp(DC~10MHz)
300mVpp(10MHz~BW)
EXT/5:1Vpp(DC~10MHz)
1.5Vpp(10MHz~BW)
Jitter <100ps(CH1~CH4)
Displacement Pre-Trigger:0~100 %memory
Delay-Trigger:0~2,000div
Edge Trigger
Slope Rising, Falling, Rising & Falling
Source CH1~CH4/EXT/(EXT/5)/ACLine
Slope Trigger
Slope Rising, Falling
Limit Range <,>,<>,><
Source CH1 ~ CH4
Time Range 2 ns ~ 4.2 s
Resolution 1 ns
Pulse Width Trigger
Polarity +wid,-wid
Limit Range <,>,<>,><
Source CH1 ~ CH4
Pulse Width Range 2 ns ~ 4.2 s
Resolution 1 ns
Video Trigger
Signal Standard NTSC,PAL,720p/50,720p/60,1080p/50,1080p/60,1080i/50,1080i/60,Custom
Source CH1 ~ CH4
Sync Any, Select
Trigger condition Line, Field
Window Trigger
Window Type Absolute, Relative
Source CH1 ~ CH4
1)
Single-channel:onechannelinCH1/CH2(orCH3/CH4)isONandanotherisOFF
Dual-channel:bothchannelsinCH1/CH2(orCH3/CH4)areON
2)
TypicalValuereferstothetestedvalueunderspecicconditions.Itmightvarywiththeambienttemperatureorotherconditions