Data Sheet

43
OPTICAL-TO-ELECTRICAL CONVERTERS
Ordering Information
Product Description Product Code
Optical-to-Electrical Converter, DC to 36 GHz, 830 to 1600nm OE6250G-M
Optical-to-Electrical Converter, 785 to 1550 nm, 2.92 mm connector with ProLink adapter OE695G
Optical-to-Electrical Converter, 500–870 nm ProBus BNC Connector OE425
Optical-to-Electrical Converter, 950–1630 nm ProBus BNC Connector OE455
Optical-to-Electrical Converter, 500–870 nm ProLink BMA Connector OE525
Optical-to-Electrical Converter, 950–1630 nm ProLink BMA Connector OE555
OE425/OE455/OE525/OE555
The O/E converters contain calibration data that can be
used to create optical reference receivers for SONET/
SDH (up to OC48/STM16), Fibre Channel, Gigabit Ether-
net, and other optical standards. This feature is available
when the O/E is used on a supported oscilloscope. The
universal reference receiver supports any data rate up
to 3 GHz and remains calibrated on any channel of the
oscilloscope.
Key Features
•
Frequency range to 5 GHz (6 GHz optical)
•
62.5 µm or narrower multi-mode or single-mode
fiber input
•
Broad wavelength range:
– 500–870 nm (OE425, OE525)
– 950–1630 nm (OE455, OE555)
•
High responsivity
•
Low noise
•
Included Accessories:
Multi-mode optical ber jumper FC-FC
FC to ST adapter
FC to SC adapter
Key Features
•
Compatible with LabMaster 10 Zi oscilloscopes
•
Frequency range DC to 9.5 GHz (electrical, -3 dB)
•
Reference receiver support from 8GFC to 10GFC FEC, or
Custom (<12.5Gb/s)
•
Full bandwidth mode (no reference receiver applied)
•
62.5/125 µm multi-mode or single-mode ber input
•
Broad wavelength range (750 to 1650 nm)
•
+7 dBm (5 mW) max peak optical power
•
Low noise (as low as 25 pW/√Hz)
•
Ideal for Eye Mask, Extinction Ratio, and Optical
Modulation Amplitude (OMA) testing
OE695G
The OE695G wide-band optical-to-electrical converter is
ideal for measuring optical datacom and telecom signals
with data rates from 622 Mb/s to 12.5+ Gb/s. Connection
to a real-time Teledyne LeCroy oscilloscope is through the
2.92mm interface, with a provided adapter to connect to
ProLink interfaces.