Data Sheet

48
Key Features
•
Provides ability for third party
current sensor to operate like a
Teledyne LeCroy probe
•
Programmable EEPROM for
saving third party current sensor
parameters
•
Allows for addition of shunt
resistor and RLC lter components
•
ProBus Active interface with
automatic scaling in A/div
•
Easy to use, saves time and
possible errors
CA10
The CA10 is a programmable and customizable interface device that seamlessly
incorporates third party current transducers/transformers with Teledyne LeCroy
oscilloscopes or motor drive analyzers. The easy to use interface provides the
ability for the CA10 to be programmed to contain the specications of the current
sensor allowing it to automatically correct for the gain or attenuation and display
results in Ampere units. This allows the third party device to be recognized and
operate as if it were a Teledyne LeCroy probe.
Product Description Product Code
ProBus Current Sensor Adapter CA10
Set of 4 CA10, ProBus Current Sensor Adapter CA10-QUADPAK
Included with Standard Conguration CA10
Description Qty
CA10 ProBus Current Adapter
1
Heat-Shrink tubing (6" length)
1
Removable Labels (sheet of 20)
1
Specications
Input Coupling DC, AC, Both
Input Termination 1MΩ or 50Ω
Programmable Bandwidth Filters Full, 200 MHz, 20 MHz
Transformer/Transducer Interface BNC
Scaling Factors Programmable
Resistive Termination (if required) Customizable (See Operator’s Manual for details)
Oscilloscope Interface
Teledyne LeCroy ProBus
Note: Some third party devices will require a separate power supply or batteries. The CA10 does not have
the ability to supply the power to these devices.
Ordering Information
Teledyne LeCroy
Probe Adapter
Model Numbers:
CA10
TPA10
PROBE ADAPTERS
Probe adapters provide simple and easy interface of third-party probes as well
as change between the different Teledyne LeCroy Oscilloscope input and cable
types (ProBus, ProLink, K/2.92 mm, BNC and SMA). Depending on the adapt-
ers, changing between the Teledyne LeCroy Oscilloscope’s input type may have
an effect on the overall performance of the channel.