Data Sheet

7
ACTIVE VOLTAGE RAIL PROBE
Product Description Product Code
Power/Voltage Rail Probe
4 GHz, 1.2x, ±30V offset, ±800mV dynamic range
RP4030
Includes Qty. 1 ProBus compatible probe offset amplier with 50 kΩ DC
input impedance and SMA input connection for provided 0.9m SMA to
MCX extension cable. Also supplied are Qty. 3 MCX solder-in leads, Qty.
3 MCX PCB Mounts, Qty. 3 MCX to U.FL coaxial cables, Qty. 5 U.FL PCB
Mounts, Qty. 1 MCX to SMA adapter, and soft carrying case. Browser tip
sold separately.
350 MHz Browser Tip Accessory RP4000-BROWSER
Includes 0 Ω (1x), 450 Ω (10x) and 950 Ω (20x) tips.
Accessories and Consumables
Qty. 3 MCX 4 GHz solder-in leads RP4000-MCX-LEAD-SI
Qty. 10 MCX PCB mount receptacle RP4000-MCX-PCBMOUNT
Qty. 3 MCX to U.FL 3 GHz ultra-mini
coax cable
RP4000-MCX-CA
BLE-UFL
Qty. 10 U.FL PCB mount receptacles RP4000-UFL-PCBMOUNT
Specications
Electrical Characteristics
Bandwidth 4 GHz (guaranteed, MCX receptacle)
4 GHz (typical, solder-in lead)
3 GHz (typical, U.FL cable +
receptacle)
350 MHz (typical, browser)
Rise Time (10-90%) 110 ps (typical, MCX receptacle or
solder-in lead)
Input Capacitance 0.1 uF (in series with 50Ω)
DC Input Resistance 50 kΩ
Offset Range ±30V
Attenuation 1.2x
Input Dynamic Range ±800 mV
Non-destruct Voltage ±50V
Noise ~5% additive to oscilloscope noise
Oscilloscope Termination DC 50Ω
Environmental
Operating Temperature Range 0 to 50 ºC
Non-operating Temperature Range -40 to +70 ºC
Humidity 5% to 80% RH (non-condensing) up
to 30 ºC, decreasing linearly to to 45%
RH at 50 ºC
Operating Altitude 3000 meters maximum
Physical
RP4030 Probe: 38.1 mm W x 15.9mm H x
73mm L (1-1/2” x 5/8” x 2-7/8”)
SMA to MCX Cable: 914mm L (36”)
MCX to Solder-in Lead: 191mm (7-
1/2”) usable length
MCX to U.FL Plug Coaxial Cable:
102mm (4”) usable length
RP4000-BROWSER 11.9mm W x 9.5mm H x 38mm L
(15/32” x 3/8” x 1-1/2”)
SMA to SMA Cable: 1m (39-3/8”)
usable length
Other
Oscilloscope Interface Teledyne LeCroy ProBus
Software Requirements Teledyne LeCroy MAUI 8.2.1.1 or
higher
Weight 119 g (0.26 lb)
Ordering Information
4 GHz of Bandwidth
Provides maximum bandwidth for probing near the CPU,
and the perfect match with the 4 GHz, 12 bit WavePro HD
when making power integrity measurements.
Wide Assortment of
Tips and Leads
The RP4030 is supplied standard with solder-in and coaxial
cables with MCX and U.FL PCB receptacle mounts. A
browser tip is optionally available. Additional receptacles or
leads may be purchased as accessories and left connected
in circuit for easy connection of different signals during
different test or validation stages.