User Manual
7
T3RC0300-UM HANDLING INSTRUCTIONS
Every eort has been made to ensure that the T3RC0300-UM is as robust as possible. To
achieve such an extremely thin Rogowski coil the T3RC0300-UM is necessarily delicate.
To prolong the life of the coil please observe the following handling instructions.
When fully inserted the ferrule will grip the coil.
When clipping or unclipping the coil, hold the ferrule as shown
Never force the free end of the coil into the ferrule.
This may damage the coil insulation.
Take care not to put any force onto the cable attached to the
coil. This may damage the coil.
When not in use return the coil to its protective case.
The minimum bend radius of this coil is 10mm. This is the minimum radius that the
coil can be bent without causing damage or shortening its life.
OPEN IN THIS
DIRECTION