Instructions

T3RC0600-HF AND T3RC3000-HF HANDLING INSTRUCTIONS
To achieve such an extremely thin Rogowski coil, the T3RC0600-HF and T3RC3000-HF are
necessarily delicate.
Every eort has been made to ensure that the T3RC0600-HF and T3RC3000-HF are as robust as
possible. To prolong the life of the coil please observe the following handling instructions.
Releasing The Coil
The free end of the coil is
unclipped by applying gentle
pressure in the direction shown.
Correct Coil Insertion
The coil is correctly positioned when the
free end of the coil is fully inserted into
the ferrule.
When correctly inserted, the ferrule will
grip the coil and hold it securely.
Never force the free end of the coil into the ferrule.
This may damage the coil insulation.
Take care not to put any force onto the cable attached to the coil.
This may damage the coil.
When not in use return the Rogowski coil to its protective case.
The minimum bend radius of this coil is 14mm. This is the minimum radius that the coil
can be bent without risk of damaging the coil or shortening its life.
9