Data Sheet

ManualsBrandsTELEDYNE LECROY ManualsTest & Measurement AccessoriesMeasurement Compatible with (diagostics accessories) LeCroy T3SA3000

T3SA3100 / T3SA3200 Data Sheet

2.1 GHz and 3.2 GHz Spectrum Analyzers

Broad Measurement Range

Frequency Range: 9 kHz to 2.1 GHz / 3.2 GHz

Tools for Improved Debugging



Frequency Range from 9 kHz to 3.2 GHz.

More application coverage from a single Spectrum

Analyzer.



-161 dBm/Hz Displayed Average Noise Level (Typ.)

View and measure very small signals.



-98 dBc/Hz @10 kHz Offset Phase Noise

(1 GHz, Typ.)

Improved specication gives more accurate

measurement results.



Optional Tracking Generator

Optional EMI Pre-compliance Test Kit

Optional Reflection Measurement Kit

Make fast and simple transmission measurements

Make EMI Receiver measurements to CISPR 16-1-1

Measure VSWR, Return Loss, Reflection Coefcient



Built-in switchable pre-amplier.

Integrated pre-amplier allows higher sensitivity

measurements.



10.1 inch (25.65 cm) color WVGA 1024 x 600 display.

Clear and flexible display aids ease of use.



USB Device, USB Host and LAN support.

Remote control your measurements.

Key Specication

Model T3SA3200 T3SA3100

Frequency Range 9 kHz ~ 3.2 GHz 9 kHz ~ 2.1 GHz

Resolution Bandwidth 1 Hz ~ 1 MHz, in 1-3-10 sequence 1 Hz ~ 1 MHz, in 1-3-10 sequence

Displayed Average Noise Level -161 dBm/Hz, Normalize to 1 Hz (typ.) -161 dBm/Hz, Normalize to 1 Hz (typ.)

Phase Noise < -98 dBc/Hz@1 GHz, 10 kHz offset < -98 dBc/Hz@1 GHz, 10 kHz offset

Amplitude Precision < 0.7 dB < 0.7 dB

Summary of content (10 pages)

PAGE 1
T3SA3100 / T3SA3200 Data Sheet 2.1 GHz and 3.2 GHz Spectrum Analyzers Broad Measurement Range Frequency Range: 9 kHz to 2.1 GHz / 3.2 GHz Tools for Improved Debugging ●● Frequency Range from 9 kHz to 3.2 GHz. More application coverage from a single Spectrum Analyzer. ●● -161 dBm/Hz Displayed Average Noise Level (Typ.) View and measure very small signals. -98 dBc/Hz @10 kHz Offset Phase Noise (1 GHz, Typ.) Improved specification gives more accurate measurement results.
PAGE 2
PRODUCT OVERVIEW Teledyne Test Tools T3SA3000 Spectrum Analyzer range consists of models with frequency ranges from 9 kHz to 2.1 GHz or 9 kHz to 3.2 GHz. The small footprint and easy user interface is augmented by a high performance specification with many advanced measurement functions and capabilities. The high performance Spectrum Analysis capability can be enhanced further with options to extend it’s measure ment capability.
PAGE 3
DESIGN FEATURES Supports four independent traces and cursors -151 dBm Displayed Average Noise Level (RBW = 10 Hz) 1 Hz Minimum Resolution Bandwidth (RBW) Zero span and demodulation capabilities Phase noise -98 dBc/Hz @ 1 GHz, offset 10 kHz On-screen VSWR/Return Loss measurements with the reflection measurement option (T3SA3000-RFM) EMI filter and Quasi-Peak detector following CISPR 16-1-1 ( T3SA3000-EMI) Advanced measurement kit (T3SA3000-ADM) includes on-screen ACPR measurements 3
PAGE 4
SPECIFICATIONS Specifications are valid under the following conditions: The instrument is within the calibration period, has been stored between 0 and 50°C for at least 2 hours prior to use, and has been powered on and warmed up for at least 40 minutes. The specifications include the measurement uncertainty, unless otherwise noted. Specifications: All products are guaranteed to meet published specifications when operating in temperatures from 5 to 45 °C, unless otherwise noted.
PAGE 5
SPECIFICATIONS Amplitude Characteristic T3SA3200 T3SA3100 Amplitude and Level Measurement range DANL to +10 dBm, 100 kHz ~ 1 MHz, preamplifier off DANL to +20 dBm, 1 MHz ~ 3.2 GHz, preamplifier off Reference level -100 dBm to +30 dBm, 1 dB steps Preamplifier 20 dB (nom.), 9 kHz ~ 3.
PAGE 6
SPECIFICATIONS Amplitude Characteristic T3SA3200 T3SA3100 Error and Accuracy Resolution bandwidth switching uncertainty Input attenuation switching uncertainty Absolute amplitude accuracy 10 kHz RBW Logarithmic resolution ±0.2 dB, liner resolution ±0.01, nominal 20 to 30 , fc = 50 MHz, preamp off, Relative to 20 dB, 1 to 51 dB attenuation ± 0.5 dB 20 °C to 30 °C, fc = 50 MHz, RBW = 1 kHz, VBW = 1 kHz, peak detector, attenuation = 20 dB, 95th percentile reliability preamp off ± 0.
PAGE 7
Advanced Measurement (Option T3SA3000-ADM) Function T3SA3200 T3SA3100 Channel power, Adjacent channel power ratio, Time domain power, Occupied bandwidth, Third-order intercept, Spectrum monitor External input and external output Front panel RF input panel TG output 10 MHz reference output 10 MHz reference input External Trigger input Security 50 Ω, N-female Front 50 Ω, N-female A 10 MHz, >0 dBm, 50 Ω, BNC-female B 10 MHz, -5 dBm ~ +10 dBm, 50 Ω, BNC-female C 1 kΩ, 5 V TTL , BNC-female D Kensington Lock p
PAGE 8
Ordering Information Product Description Product code Standard configurations Utility Options EMI Options Reflect Measurement Options T3SA3000 Spectrum Analyzer Spectrum Analyzer, 9 kHz ~ 3.2 GHz Spectrum Analyzer, 9 kHz ~ 2.
PAGE 9
PAGE 10
ABOUT TELEDYNE TEST TOOLS Company Profile Teledyne LeCroy is a leading provider of oscilloscopes, protocol analyzers and related test and measurement solutions that enable companies across a wide range of industries to design and test electronic devices of all types. Since our founding in 1964, we have focused on creating products that improve productivity by helping engineers resolve design issues faster and more effectively.