Owner manual

TA660 User's Manual Catalyst Enterprises, Inc
35
Creating a Data Block File
To create an exerciser data file click the Data Block Icon on the
Main Menu bar to open the Data File dialog box shown in Figure
23.
Figure 23 Data File Definition Dialog Box
Click New Data Block in the Data File Definition dialog box to enter
a data block (“Data Block 0”) in the Data Blocks area. With the new
data block highlighted you may define a specific block pattern or
create a walking bit type pattern.
Fixed Data Pattern Click the Define Pattern button to open the Define Data
Pattern dialog box.
Figure 24 Define Data Pattern Dialog Box
Enter a pattern and select the number of times that that pattern is to be
repeated and click OK.
Multiple Line Pattern You may define a block of multiple lines that can be
automatically repeated. Figure 25 shows the definition of a
two line pattern to be repeated 3 times. To add a new line,
enter the data in the edit box and then click on the down
arrow to include it in the list.