Owner manual

TA660 User's Manual Catalyst Enterprises, Inc

Figure 33 Read/Modify Write Dialog Box

1. Enter an address the contents of which you wish to modify in the

Current Address edit box.

2. Enter the value to be written to that address in the New Value edit

box.

NOTE: This feature makes the TA660 to be a bus master and

may be used to read or write any registers or memory contents

of a target device without having to set the programming menu.

Write Read Verify

To perform write read verify select Write/Read Verify . . .from

the Exerciser dropdown list on the menu bar. This will open the

Write/Read verify dialog box.

Figure 34 Write/Read Verify Dialog Box

1. Select the command type from the Command dropdown list, enter

the Target address, BE and either the data to be written or a

previously defined data block and a DMA size.