Owner manual

TA660 User's Manual Catalyst Enterprises, Inc
42
TA660 as Memory
TA660 can be used as a target memory so that a master device can write and read to and
from it to see if the master can perform write and read operation properly.
To perform this test, select TA660 as Memory, identify an address to
the TA660 that us not used by the system memory or any agent in the
system, and identify the last address or the number of bytes to write
and read.
Figure 40 TA660 As Memory Dialog Box
Once "OK" is entered another message informs the user to perform
the write instruction by the master. TA660 stays in running mode
until the master writes data.
Once the data has been transferred, the TA660 captures the data as
target memory and displays it on the screen for verification of write.
At this time the user may execute the "Run" from this menu to put the