Owner manual

TA660 User's Manual Catalyst Enterprises, Inc

After Grant Asserted The TA660 will request the bus

and start the transaction only

after the GNT# is asserted.

Master Completes Transaction at Time Out

Disabled The TA660 continues to

complete the transaction for

however many clocks it takes

regardless of GNT# being

deasserted.

Enabled The TA660 completes the

current transaction as soon as

possible after GNT# is

deasserted.

Set Interrupts

Setting interrupts may be done in two ways, 1) From a compiled program for a specified

number of clocks or 2) Outside of a compiled program, indefinitely until reset by the user

again. To set it indefinitely:

To set one or more interrupts click Exerciser on the menu bar

and then select Set Interrupts from the dropdown list to open the

Set Interrupt dialog box.

Figure 54 Set Interrupts Dialog Box

Select the interrupts that you wish to set and click OK.

Continuous Setting, Outside Program Setting the interrupts in this manner

sets them continuously until you uncheck them.

Limited Duration, Inside Program You may set one or more interrupts for one or

more program steps when running compiled Program files.

See Forcing an Interrupt on page 58.