Owner manual

TA660 User's Manual Catalyst Enterprises, Inc
62
Defining an Event Pattern
1. Click the Event Patterns tab to open the Event Pattern Definition
dialog box.
Figure 55 Event Pattern Definition Dialog Box
To enter a parameter or edit a previously entered parameter, double-
click in the appropriate data field to open a corresponding dialog box,
enter the required data, and click OK. The changes entered will be
reflected in the edited data field.
Keyboard Edit You may also edit all of the data fields by using the
keyboard by moving through the available data fields using
the arrow keys and pressing Enter on the desired field to
either open the associated dialog box or to change the
contents from X to 0 to 1.
For example, to define EV1 as a CUSTOM event, double click first in
the EV1 field and then in each of the data fields that you wish to
define to set the required parameters in the corresponding dialog box.
Set Default To set all of the PCI signals to the default value of don’t
care, X, for any given event EVx, position the highlighted
cursor anywhere in that row and hit the “del” key.
Set Transfer Type The transfer type selection dialog box shown in Figure 56
controls the pre-determined signal settings and address