Owner manual

TA660 User's Manual Catalyst Enterprises, Inc
72
After the occurrence of a timing violation the timing violation display will open as shown
in Figure 67. The red signals represent timing violation. Bus signals are shown in a code.
As an example 00000080 indicates that the timing problem is for AD7, and 1000000C
indicate the problem is for AD28, AD3 & AD2 signals.
Figure 67 Timing Violation Results Display
To view the result as a list file output display, click the List
button.
Display Setup Use the setup screen to configure your display.
1. Click the Setup Screen button in the results display window to open
the Timing Error Signal selection dialog box as shown in Figure 68.
Figure 68 Timing Error Signal Selection
2. Select the signals for display from the Remaining Signals list and
click Add.
3. Select other display options such as display of time in units of time
or clocks, show gridlines etc. and click OK.