Owner manual

TA660 User's Manual Catalyst Enterprises, Inc

TA660 Analyzer Card

Figure 3 shows a TA660 PCI Analyzer card identifying Status LED

locations, external trigger input and output connections and the

external signal input connector with the supplied cable attached.

Figure 3 TA660 PCI Analyzer Card

Status LED Function Description

SYS When green Indicates if the system voltages are within 5%

of their value. If any of +5V, +3.3V, +12V drop more than

5% the SYS LED turns red. SYS LED also comes up red as

a test on power on and then if the voltages are okay it turns

green once the software is executed. To enable voltages for

sensing see on page 15.

DUT Indicates that the voltage to the DUT is on. In this case the

user may not remove or insert any card in to the top

connector of the TA660.

CONF Indicates that TA660 has been recognized and configured

by the software, therefore the parallel port link is working.

TRIG Indicates that the analyzer has met the trigger condition and

is awaiting for the defined post-trigger data to be captured.

For TA660CA Compact PCI analyzer/exerciser LED status information see APPENDIX

B TA660CA CompactPCI Card.