Datasheet
TPA10 TekProbe
®
Probe Adapter
Key Features
•
Allows TekProbe interface level II
probes to work with any
ProBus-equipped Teledyne LeCroy
oscilloscope
•
Automatic probe detection
•
Provides all necessary power and
offset control to the attached probe
•
Supports probes up to 4 GHz
•
Easy rmware updates
•
Wide variety of probes
supported including:
–
Preampliers
–
Current Probes
–
Single-Ended Active Probes
–
Differential Active Probes
Leverage Existing Probes
Investing in new probes can be very
expensive. With the TPA10, existing
TekProbe probes can be used on
Teledyne LeCroy oscilloscopes,
allowing for easy and affordable
access to the latest in oscilloscope
technology.
Automatic Probe Detection
Simply plug the TPA10 into any
ProBus-equipped Teledyne LeCroy
oscilloscope, attach a supported
TekProbe interface level II probe,and
the oscilloscope will automatically
detect which probe is attached.
Wide Variety of
Supported Probes
The TPA10 ProBus Probe Adapter
supports many popular probes up to
4 GHz including: preampliers, current
probes, single-ended active probes and
differential active probes.
Easy Firmware Updates
The rmware for the TPA10 is
included in the oscilloscope software.
If an updated rmware version for
the TPA10 is available, an “Update
Firmware” button will automatically
appear on the dialog making
updates simple.
The TPA10 Tektronix TekProbe Probe Adapter permits connection
of select Tektronix TekProbe interface level II probes to any
ProBus-equipped Teledyne LeCroy oscilloscope. The TPA10
automatically detects which Tektronix probe is attached and supplies
all necessary power and offset control to the probe, and communicates
the probe signal to the Teledyne LeCroy oscilloscope.