Data Sheet

121
Call PD_WaitForGetManufacturerInfo_Cable()
5.1.121 PD_SetSecurityResponseDataBlock_Cable
Sets the SecurityResponse Data Block(for cable) in PD Exerciser. It must be called before
PD_WaitForSecurityRequest_Cable or PD_DelayAutoResponse to take effect.
Note - PD Exerciser should also act as Cable Plug to be able to process this command.
Format
Call PD_SetSecurityResponseDataBlock_Cable( PD_SecurityResponseDB
$security_resp_db )
Parameters
$security_resp_db
Parameter type is PD_SecurityResponseDB. Refer to PD_SecurityResponseMsg for available types which
are derived from this type.
Result
None
Examples
PD_Set $PdGlobalSettings.EnableCableEmulator = PD_TRUE
.
.
$security_resp_db = PD_SRPDB_Certificate
Call PD_SetSecurityResponseDataBlock_Cable( $security_resp_db )
5.1.122 PD_SetSecurityRequestSetting_Cable
Applies setting to SecurityRequest_Cable related commands in PD Exerciser. It must be
called before PD_WaitForSecurityRequest_Cable or PD_DelayAutoResponse to take effect.
Note - PD Exerciser should also act as Cable Plug to be able to process this command.
Format
Call PD_SetSecurityRequestSetting_Cable( PD_SecurityRequest_Settings $settings )
Parameters
$settings
Refer to PD_SetSecurityRequestSetting for more details.
Result
None
Examples
PD_Set $PdGlobalSettings.EnableCableEmulator = PD_TRUE
.
.
$secreq_settings = PD_SecurityRequest_Settings
{
WaitTimeout = 50000
}
Call PD_SetSecurityRequestSetting( $secreq_settings )